Welcome to the Publications of AUST as well as of the Members of the Faculty of the University. We invite you to browse our site using the navigation found above. Thank you for your interest in our publications.

Title | Type | Journal Name | Year | Author | Department | URL |
---|---|---|---|---|---|---|
Dual-side polished SPR-PCF ultra-wide refractive index sensor with high amplitude sensitivity | Journal Article | Journal of Optics (IOP Science) | 2025 | Dr. Russel Reza Mahmud | Department of Electrical & Electronic Engineering | Paper Link |
Innovative TiO2/Ag/TiO2 Sandwiched SPR Sensor with WSe2 Layer for Efficient Dengue Virus Detection via TMM and FEM | Journal Article | Plasmonics (Springer) | 2025 | Dr. Russel Reza Mahmud | Department of Electrical & Electronic Engineering | Paper Link |
High Sensitivity One Dimensional Photonic Crystal Sensor Design for Waterborne Bacteria Detection | Journal Article | Sensing and Imaging (Springer) | 2025 | Dr. Russel Reza Mahmud | Department of Electrical & Electronic Engineering | Paper Link |
Design and analysis of a triangular silicon based nano plasmonic coupler with an enhanced transmittance at the optical wavelength | Journal Article | Optics Communications (Elsevier) | 2025 | Dr. Russel Reza Mahmud | Department of Electrical & Electronic Engineering | Paper Link |
HfO2-Blue Phosphorus/molybdenum disulfide hybrid structure-based surface plasmon optical refractometric sensor with multiple light source for rapid novel coronavirus detection | Journal Article | Optik (Elsevier) | 2025 | Dr. Russel Reza Mahmud | Department of Electrical & Electronic Engineering | Paper Link |
Artificial intelligence as a catalyst for sustainable tourism growth and economic cycles | Journal Article | Technological Forecasting and Social Change | 2025 | Mr. Md. Shak Forid | School of Business | Paper Link |
Optimal Control and Disease Dynamics of Tuberculosis Model with Uncertainty and Sensitivity Analysis | Journal Article | International Journal of Science, Mathematics and Technology Learning | 2025 | Dr. Jannatun Nayeem | Department of Arts and Sciences | Paper Link |
A Techno-Economic Study on the Prospect of CSP Plant for Different Areas of Dhaka, Bangladesh | Conference Proceedings | Proc. of the 5th International Conference on Electrical, Communication and Computer Engineering (ICECCE) | 2025 | Dr. Muhammad Sajjad Hossain | Department of Arts and Sciences | Paper Link |
Magnetohydrodynamic mixed convective heat transfer augmentation in a rectangular lid-driven enclosure with a circular hollow cylinder utilizing nanofluids | Journal Article | International Journal of Thermofluids | 2025 | Prof. Dr. Md. Masum Billah | Department of Arts and Sciences | Paper Link |
Quantification of external disturbance forces in sliding microwire | Journal Article | Heliyon | 2025 | Dr. Fazlar Rahman | Department of Mechanical and Production Engineering | Paper Link |
Highly Sensitive TiO2-Gold Coated Plasmonic Biosensor with Microchannel-Based D-shaped Photonic Crystal Fiber | Journal Article | Plasmonics (Springer) | 2025 | Mr. Safayat-Al-Imam | Department of Electrical & Electronic Engineering | Paper Link |
Short Paper: Predicting and Analyzing EV Energy Consumption in Bangladesh: A Machine Learning Approach | Conference Proceedings | 11th International Conference on Networking, Systems, and Security (NSysS) | 2025 | Mr. Md. Adnan Quaium | Department of Electrical & Electronic Engineering | Paper Link |
Application of Chitosan Nanoparticles in Veterinary Medicine and Diagnostics | Book | In Book: Fundamentals and Biomedical Applications of Chitosan Nanoparticles | 2025 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Recent Progress of Carbon-Based Quantum Dots and Nanotubes for Cancer Targeting and Drug Delivery Applications | Journal Article | Journal of Drug Delivery Science and Technology | 2025 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | |
Mechanical Performance of Unidirectional Banana/Snake Plant Fibers Reinforced Epoxy Hybrid Composites: An Experimental and Numerical Analysis | Journal Article | Journal of Polymer Bulletin | 2025 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Mechanical and Thermal Performances of Banana Fiber-reinforced Gypsum Composites | Journal Article | International Journal of Polymer Science | 2025 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Software Metric Based Impact Analysis of Code Smells - A Large Scale Empirical Study | Journal Article | Software: Practice and Experience | 2025 | Mr. Md. Masudur Rahman | Department of Computer Science and Engineering | Paper Link |
CNCRP Manual Based Seismic Evaluation and Retrofitting of Existing RC Buildings: A Case Study | Journal Article | Journal of Rehabilitation in Civil Engineering | 2025 | Dr. Debasish Sen | Department of Civil Engineering | Paper Link |
Forced convective heat transfer over twisted and perforated forked pin fin heat sink: A numerical study | Journal Article | International Journal of Thermal Sciences | 2025 | Mr. Md. Samiul Haider Chowdhury | Department of Mechanical and Production Engineering | Paper Link |
Mechanical properties of hemp fiber‐reinforced thermoset and thermoplastic polymer composites: A comprehensive review | Journal Article | SPE Polymers | 2025 | Ms. Fahmida-E-Karim | Department of Textile Engineering | Paper Link |
Asorption of lead(II) onto magnetic chitosan@calcium phosphate rock biocomposite | Journal Article | Materials Chemistry and Physics (Q1, IF 4.3) | 2025 | Dr. Md. Aminul Islam | Department of Arts and Sciences | Paper Link |
Enhancing supply chain management in manufacturing plants: anomaly detection and mitigation using MCDM and Machine Learning techniques | Conference Proceedings | 8th International Conference on Mechanical, Industrial and Energy Engineering 2024 02-04 January, 2025, Khulna, BANGLADESH | 2025 | Mr. Sheak Salman | Department of Mechanical and Production Engineering | |
Pathways to Advancing Sustainable Practices in Industrial Solid Waste Management: Unveiling Obstacles and Implications | Journal Article | Next Research | 2025 | Mr. Sheak Salman | Department of Mechanical and Production Engineering | Paper Link |
Optimizing inventory management in food processing: A conceptual model linking supply chain costs and complexity to sales, quality, and customer satisfaction | Journal Article | Uncertain Supply Chain Management | 2025 | Mr. Rafid Ahmed Chowdhury | Department of Mechanical and Production Engineering | Paper Link |
Efects of patterns of wavy walls and SWCNTs‑MWCNTs‑based nanofuids on mixed convective heat transfer in a lid‑driven enclosure containing elliptical block of various aspect ratio | Journal Article | Journal of the Brazilian Society of Mechanical Sciences and Engineering | 2025 | Dr. Md. Shahnewaz Bhuiyan | Department of Mechanical and Production Engineering | Paper Link |
CRO-PUF: Resilience to machine learning and differential power attacks | Journal Article | Computers \& Security | 2025 | Dr. Fakir Sharif Hossain | Department of Electrical & Electronic Engineering | |
Mechanical properties of hemp fiber‐reinforced thermoset and thermoplastic polymer composites: A comprehensive review | Journal Article | SPE Polymers | 2025 | Mr. Md. Redwanul Islam | Department of Textile Engineering | Paper Link |
Forced convective heat transfer over twisted and perforated forked pin fin heat sink: A numerical study | Journal Article | International Journal of Thermal Sciences | 2025 | Dr. Istiaq Jamil Siddique | Department of Mechanical and Production Engineering | Paper Link |
Identifying land use land cover change using google earth engine: a case study of Narayanganj district, Bangladesh | Journal Article | Theoretical and Applied Climatology | 2025 | Mr. S. M. Nazmul Haque | Department of Civil Engineering | |
HfO2-Blue Phosphorus/molybdenum disulfide hybrid structure-based surface plasmon optical refractometric sensor with multiple light source for rapid novel coronavirus detection | Journal Article | Optik (Elsevier) | 2025 | Mr. Md. Faysal Nayan | Department of Electrical & Electronic Engineering | Paper Link |
Design and Analysis of a Triangular Silicon based Nano Plasmonic Coupler with an Enhanced Transmittance at the Optical Wavelength | Journal Article | Optics Communications (Elsevier) | 2025 | Mr. Md. Faysal Nayan | Department of Electrical & Electronic Engineering | Paper Link |
Dual-side polished SPR-PCF ultra-wide refractive index sensor with high amplitude sensitivity | Journal Article | Journal of Optics (IOP Science) | 2025 | Mr. Md. Faysal Nayan | Department of Electrical & Electronic Engineering | Paper Link |
High sensitivity one-dimensional photonic crystal sensor design for waterborne bacteria detection | Journal Article | Sensing and Imaging (Springer) | 2025 | Mr. Md. Faysal Nayan | Department of Electrical & Electronic Engineering | Paper Link |
Binary Coded Phase Distribution of a Novel Intelligent Reflecting Surface for Beams-Steering | Conference Proceedings | 2024 IEEE Conference on Telepresence, Caltech, Pasadena, CA, USA | 2025 | Prof. Dr. A K M Baki | Department of Electrical & Electronic Engineering | Paper Link |
Ben-Sarc: A self-annotated corpus for sarcasm detection from Bengali social media comments and its baseline evaluation | Journal Article | Natural Language Processing | 2024 | Mr. Faisal Muhammad Shah | Department of Computer Science and Engineering | Paper Link |
A Study of Contrastive Learning Methods for Bengali Social Analysis | Conference Proceedings | 2024 6th International Conference on Electrical Engineering and Information & Communication Technology (ICEEICT) | 2024 | Mr. Faisal Muhammad Shah | Department of Computer Science and Engineering | Paper Link |
A Deep Learning-Based Bengali Visual Question Answering System Using Contrastive Loss | Conference Proceedings | 2024 6th International Conference on Electrical Engineering and Information & Communication Technology (ICEEICT) | 2024 | Mr. Faisal Muhammad Shah | Department of Computer Science and Engineering | Paper Link |
Harnessing large language models over transformer models for detecting Bengali depressive social media text: A comprehensive study | Journal Article | Natural Language Processing Journal | 2024 | Mr. Faisal Muhammad Shah | Department of Computer Science and Engineering | Paper Link |
Bengali fake reviews: A benchmark dataset and detection system | Journal Article | Neurocomputing | 2024 | Mr. Faisal Muhammad Shah | Department of Computer Science and Engineering | Paper Link |
Simulation and survey-based feasibility study of concentrated solar plant in northern and central Bangladesh | Journal Article | Results in Engineering, | 2024 | Prof. Dr. A.K.M. Ehtesanul Islam | Department of Electrical & Electronic Engineering | Paper Link |
Comparative Study on the Performance of Microstrip Patch Antenna using Gold, Silver, and Copper as Radiating Surfaces | Conference Proceedings | 2024 Second International Conference on Emerging Trends in Information Technology and Engineering (ICETITE) | 2024 | Prof. Dr. A.K.M. Ehtesanul Islam | Department of Electrical & Electronic Engineering | Paper Link |
Design and Analysis of Multi Slotted Micro-Strip Patch Antenna Operating in ISM Band for Breast Cancer Detection | Conference Proceedings | 2023 26th International Conference on Computer and Information Technology (ICCIT) DOI: 10.1109/ICCIT60459.2023 13-15 Dec. 2023 | 2024 | Prof. Dr. A.K.M. Ehtesanul Islam | Department of Electrical & Electronic Engineering | Paper Link |
Pre-Feasibility Study on Concentrated Solar Power Plant for Restructuring Power System in Urban Areas of Bangladesh | Conference Proceedings | 2023 10th IEEE International Conference on Power Systems (ICPS) | 2024 | Prof. Dr. A.K.M. Ehtesanul Islam | Department of Electrical & Electronic Engineering | Paper Link |
Empowering E-mobility: Day-ahead dynamic time of use tariff for electric vehicle charging | Journal Article | Energy Reports | 2024 | Prof. Dr. Tareq Aziz | Department of Electrical & Electronic Engineering | Paper Link |
Performance Analysis of a Modified Three Phase Symmetric Five Level Inverter For Renewable Energy Applications | Conference Proceedings | 2024 Third International Conference on Power, Control and Computing Technologies (ICPC2T) | 2024 | Prof. Dr. Tareq Aziz | Department of Electrical & Electronic Engineering | |
Maximizing power transfer in transmission networks with TCPS: A non-linear programming-genetic algorithm approach | Journal Article | Energy Reports | 2024 | Prof. Dr. Tareq Aziz | Department of Electrical & Electronic Engineering | Paper Link |
WBAN-IoMT Integration for A New Frontier in Healthcare Technology | Others | 2024 International Conference on Integrated Circuits and Communication Systems (ICICACS) | 2024 | Prof. Dr. Md. Meganur Rhaman | Department of Electrical & Electronic Engineering | Paper Link |
Novel Gadolinium (Gd) and Chromium (Cr) Co-Doped Yttrium Iron Garnet (Y3Fe5O12) Nanoparticles | Journal Article | Arabian Journal for Science and Engineering (Springer) | 2024 | Prof. Dr. Md. Meganur Rhaman | Department of Electrical & Electronic Engineering | Paper Link |
A closed-form solution of BER for a Convolutional Coded non-Hermitian OFDM FSO System with Polarization Diversity | Journal Article | Journal of Optical Communication | 2024 | Prof. Dr. Md. Shariful Islam | Department of Electrical & Electronic Engineering | |
BER Performance Analysis of a convolutional coded non-Hermitian OFDM FSO System over Strong Atmospheric Turbulent Channel. | Journal Article | Optical and Quantum Electronics | 2024 | Prof. Dr. Md. Shariful Islam | Department of Electrical & Electronic Engineering | |
A high-performance biosensor based on one-dimensional photonic crystal for the detection of cancer cells | Journal Article | Optical and Quantum Electronics (Springer) | 2024 | Dr. Russel Reza Mahmud | Department of Electrical & Electronic Engineering | Paper Link |
Investigation of dual plasmonic material integrated wrench-shaped PCF sensor with broadband resonance for cancer cell & chemical detection | Journal Article | Optik (Elsevier) | 2024 | Dr. Russel Reza Mahmud | Department of Electrical & Electronic Engineering | Paper Link |
Optical Based Surface Plasmon Resonance Sensor for the Detection of the Various Kind of Cancerous Cell | Journal Article | Cell Biochemistry and Biophysics (Springer) | 2024 | Dr. Russel Reza Mahmud | Department of Electrical & Electronic Engineering | Paper Link |
Photonic crystal fiber-based SPR biosensor coated with Ag-TiO2 and Au-TiO2 for the detection of skin cancer: a comparison | Journal Article | Optical and Quantum Electronics (Springer) | 2024 | Dr. Russel Reza Mahmud | Department of Electrical & Electronic Engineering | Paper Link |
Performance analysis of graphene field effect transistor at nanoscale regime | Journal Article | e-Prime - Advances in Electrical Engineering, Electronics and Energy (Elsevier) | 2024 | Dr. Russel Reza Mahmud | Department of Electrical & Electronic Engineering | Paper Link |
Quantum Insights into Dielectric Materials and Oxide Thickness-Dependent Conductance in Single-Walled CNTFET: A Parametric Simulation Study | Conference Proceedings | International Conference on Advances in Computing, Communication, Electrical, and Smart Systems (iCACCESS-2024) | 2024 | Dr. Russel Reza Mahmud | Department of Electrical & Electronic Engineering | Paper Link |
Performance Analysis of Ag TiO2 Coated Hexagonal Shaped Photonic Crystal Fiber Plasmonic Sensor and Ethanol’s Low Water Content Detection | Journal Article | Plasmonics (Springer) | 2024 | Dr. Russel Reza Mahmud | Department of Electrical & Electronic Engineering | Paper Link |
2D Nano Material Based Highly SPR Resonance Biosensor for Wide Ranged Hemoglobin Concentration Measurement | Conference Proceedings | Frontiers in Optics + Laser Science 2024 (FiO, LS) | 2024 | Mr. Khandakar Md. Ishtiak | Department of Electrical & Electronic Engineering | Paper Link |
Highly Sensitive ZnO/Ag/BaTiO₃/MoS₂ hybrid structure-based surface plasmon biosensor for the detection of mycobacterium tuberculosis bacteria | Journal Article | Optics Continuum | 2024 | Mr. Khandakar Md. Ishtiak | Department of Electrical & Electronic Engineering | Paper Link |
Design and Development of an Alerting Device for Pacemaker Patients to Mitigate Risks from High Magnetic Fields | Conference Proceedings | 6th International Conference on Electrical Information and Communication Technology (EICT) , IEEE, 2024 | 2024 | Mr. Hasib Md. Abid Bin Farid | Department of Electrical & Electronic Engineering | |
Integrating Metro Stations with the Adjacent Urban Fabric Using TOD Principles: A Case of Agargaon Metro Station, Dhaka | Journal Article | Journal of Contemporary Urban Affairs | 2024 | Dr. Maher Niger | Department of Architecture | Paper Link |
Factors of Patient’s Privacy Perception in Nursing Units: A Case Study with Nursing Units of a Private Hospital in Dhaka, Bangladesh | Journal Article | Southeast University Journal of Architecture | 2024 | Ms. Asma Siddika | Department of Architecture | Paper Link |
Unlocking Health Benefits: A Comparative Analysis of CSEB and Traditional Burnt Bricks in Bangladesh's Sustainable Building Practices. | Journal Article | Journal of Chemical Engineering, IEB | 2024 | Ms. Asma Siddika | Department of Architecture | Paper Link |
Investigating Spindle Tape Aging Efects on Ring Spun Yarn Quality: A Regression Analysis Approach | Journal Article | Fibers and Polymers | 2024 | Mr. Subrata Kumar Saha | Department of Textile Engineering | Paper Link |
Prioritising Yarn Quality Via Varying Top Roller Hardness: A Fuzzy Application | Journal Article | Textile & Leather Review | 2024 | Mr. Subrata Kumar Saha | Department of Textile Engineering | Paper Link |
Superior Conductive, Large Diameter CNT Composite Yarn of Insulative Polymer: Inferences of a Unidirectional Compression-Stretching Technique | Journal Article | Journal of Polymer Science | 2024 | Dr. Farial Islam Farha | Department of Textile Engineering | |
Flexible, Quickly Responsive, and Highly Efficient Carbon Nanotube/Thermoplastic Polyurethane Composite Yarn for Multifunctional Wearable Devices | Journal Article | ACS Applied Polymer Materials | 2024 | Dr. Farial Islam Farha | Department of Textile Engineering | |
Investigating the applicability of COPERT 5.5 emission software in Bangladesh and developing countrywide vehicular emission inventories | Journal Article | Environmental Science: Atmospheres | 2024 | Dr. Md. Shahid Mamun | Department of Civil Engineering | Paper Link |
Soil Dynamic Response and Site Amplification Parameters for Saguenay, Eastern Canada | Conference Proceedings | 8th International Conference on Earthquake Geotechnical Engineering (8ICEGE), Osaka, Japan | 2024 | Mr. A S M Fahad Hossain | Department of Civil Engineering | Paper Link |
Assessment of seismic slope stability of Rangamati Hill Tracts, Bangladesh | Journal Article | Discover Geoscience (Springer) | 2024 | Mr. A S M Fahad Hossain | Department of Civil Engineering | Paper Link |
Landslide Risk Assessment and Preventive Measures of Selected Locations intheRangamati District, Bangladesh | Journal Article | Journal of Studies in Science and Engineering | 2024 | Mr. A S M Fahad Hossain | Department of Civil Engineering | Paper Link |
Unlock Success: How the Organizational Culture Plays a Mediating Role between Employee Job Satisfaction and Organizational Performance | Journal Article | MANTHAN: Journal of Commerce and Management | 2024 | Dr. Parul Akhter | School of Business | Paper Link |
Exploration of the Relationship between Organizational Culture and Its Performance in the Bangladeshi Microfinance Sector with Organizational Innovation as a Mediating Factor | Journal Article | ESJ Social Sciences | 2024 | Dr. Parul Akhter | School of Business | Paper Link |
Role of Micro Finance Institutions (MFIs) in Borrower Graduation: Bangladesh Perspective | Book | Department of Management, University of Dhaka | 2024 | Dr. Parul Akhter | School of Business | |
How Financial Literacy Impacts Financial Well-Being: The Influence of Financial and Technical Efficacy | Journal Article | International Journal of Economics and Financial Issues | 2024 | Dr. Parul Akhter | School of Business | Paper Link |
Evaluating Industrial Dispute Resolution Methods: An Empirical Study | Journal Article | Evaluating Industrial Dispute Resolution Methods: An Empirical Study | 2024 | Dr. S.M. Shafiul Alam | School of Business | Paper Link |
Weaving a greener future: The impact of green human resources management and green supply chain management on sustainable performance in Bangladesh's textile industry | Journal Article | Cleaner Logistics and Supply Chain | 2024 | Dr. S.M. Shafiul Alam | School of Business | Paper Link |
Unveiling the Effects of ICT Adoption in the Apparel Sector of Bangladesh Based on Technology-Organization-Environment Framework | Journal Article | Asia Pacific Journal of Information Systems (APJIS) | 2024 | Dr. S.M. Shafiul Alam | School of Business | Paper Link |
Exploring the mediating effect of customer satisfaction on the relationships between service quality, efficiency, and reliability and customer retention, loyalty in E-banking performance in emerging markets | Journal Article | Cogent Business & Management | 2024 | Dr. Naznin Sultana Chaity | School of Business | Paper Link |
Impact of Green Banking Practices on Green CSR and Sustainability in Private Commercial Banks: The Mediating Role of Green Financing Activities | Journal Article | Journal of Sustainability Research | 2024 | Dr. Naznin Sultana Chaity | School of Business | Paper Link |
Leveraging Green HRM to Foster Organizational Agility and Green Culture: Pathways to Enhanced Sustainable Social and Environmental Performance | Journal Article | Sustainability | 2024 | Dr. Naznin Sultana Chaity | School of Business | Paper Link |
AI Capability and Sustainable Performance: Unveiling the Mediating Effects of Organizational Creativity and Green Innovation with Knowledge Sharing Culture as a Moderator | Journal Article | Sustainability | 2024 | Dr. Naznin Sultana Chaity | School of Business | Paper Link |
Evaluating Industrial Dispute Resolution Methods: A Case Study of Bangladesh | Journal Article | European Scientific Journal | 2024 | Dr. Naznin Sultana Chaity | School of Business | Paper Link |
Exploration of the Relationship between Organizational Culture and Its Performance in the Bangladeshi Microfinance Sector with Organizational Innovation as a Mediating Factor | Journal Article | European Scientific Journal | 2024 | Dr. Naznin Sultana Chaity | School of Business | Paper Link |
How Financial Literacy Impacts Financial Well-Being: The Influence of Financial and Technical Efficacy | Journal Article | International Journal of Economics and Financial Issues | 2024 | Dr. Naznin Sultana Chaity | School of Business | Paper Link |
HOLISTIC MARKETING AND SUSTAINABILITY: INSIGHTS FROM A BIBLIOMETRIC ANALYSIS OF GLOBAL RESEARCH | Journal Article | Bangladesh Journal of Multidisciplinary Scientific Research | 2024 | Mr. Kazi Ahmed Farhan | School of Business | Paper Link |
Harnessing Artificial Intelligence to Drive Global Sustainability: Insights Ahead of SAC 2024 in Kuala Lumpur | Journal Article | Digitalization and Sustainability Review | 2024 | Mr. Kazi Ahmed Farhan | School of Business | Paper Link |
Effective Change Management Strategies: Lessons Learned from Successful Organizational Transformations | Journal Article | American Journal of Trade and Policy | 2024 | Mr. Kazi Ahmed Farhan | School of Business | Paper Link |
Transforming Applied Medical Sciences: The Impact of AI, VR, and AR on Research, Education Technology, and Clinical Practices | Journal Article | Journal of Angiotherapy | 2024 | Mr. Md. Shak Forid | School of Business | Paper Link |
Interdisciplinary Approaches to Social Justice: Bridging Sociology, Law, and Education | Journal Article | Library Progress International | 2024 | Mr. Md. Shak Forid | School of Business | Paper Link |
Determinants of customer-based brand equity on brand image: The moderating role of tourism management and advertisement | Journal Article | Corporate Governance and Organizational Behavior Review | 2024 | Mr. Md. Shak Forid | School of Business | Paper Link |
On the applications of neural network technique for electro-viscoplastic Casson hybrid ferrofluid with a permeable channel | Journal Article | 2024 | Dr. Humaira Farzana | Department of Arts and Sciences | Paper Link | |
Bernstein Collocation Technique for a Class of Sturm-Liouville Problems | Journal Article | Heliyon | 2024 | Dr. Humaira Farzana | Department of Arts and Sciences | Paper Link |
Free convection at different locations of adiabatic elliptic blockage in a square enclosure | Journal Article | Mathematical Modelling and Numerical Simulation with Applications | 2024 | Prof. Dr. Sreebash Chandra Paul | Department of Arts and Sciences | Paper Link |
Garcinia mangostana L. Leaf-Extract-Assisted Green Synthesis of CuO, ZnO and CuO-ZnO Nanomaterials for the Photocatalytic Degradation of Palm Oil Mill Effluent (POME) | Journal Article | Catalysts | 2024 | Dr. Samar Kumar Guha | Department of Arts and Sciences | Paper Link |
Green synthesis of ZnO nanoparticles using the mangosteen (Garcinia mangostana L.) leaf extract: Comparative preliminary in vitro antibacterial study | Journal Article | Green Processing and Synthesis | 2024 | Dr. Samar Kumar Guha | Department of Arts and Sciences | Paper Link |
As I See Things Around Me | Book | 2024 | Mr. Mohammad Rukanuddin | Department of Arts and Sciences | ||
Large eddy simulation of a turbulent channel flow using dynamic Smagorinsky subgrid scale model and differential equation wall model | Journal Article | International Journal of Thermofluids | 2024 | Prof. Dr. Muhammad Saiful Islam Mallik | Department of Arts and Sciences | |
Free convection at different locations of adiabatic elliptic blockage in a square enclosure | Journal Article | Mathematical Modelling and Numerical Simulation with Applications | 2024 | Prof. Dr. Muhammad Saiful Islam Mallik | Department of Arts and Sciences | Paper Link |
On the applications of neural network technique for electro-viscoplastic Casson hybrid ferrofluid with a permeable channel | Journal Article | International Journal of Thermofluids | 2024 | Dr. Muhammad Sajjad Hossain | Department of Arts and Sciences | Paper Link |
Simulation and survey-based feasibility study of concentrated solar plant in northern and central Bangladesh | Journal Article | Results in Engineering | 2024 | Dr. Muhammad Sajjad Hossain | Department of Arts and Sciences | Paper Link |
Magneto-hydrodynamic Natural Convective Flow within Square Enclosure Having Central Circular Hot Obstacle | Conference Proceedings | ICME-2023 SSRN (Elsevier) | 2024 | Dr. Muhammad Sajjad Hossain | Department of Arts and Sciences | Paper Link |
Augmentation of heat exchanger performance with hybrid nanofluids: Identifying research gaps and future indications - A review | Journal Article | International Communications in Heat and Mass Transfer | 2024 | Dr. Muhammad Sajjad Hossain | Department of Arts and Sciences | Paper Link |
Large eddy simulation of a turbulent channel flow using dynamic Smagorinsky subgrid scale model and differential equation wall model | Journal Article | International Journal of Thermofluids | 2024 | Dr. Muhammad Sajjad Hossain | Department of Arts and Sciences | Paper Link |
Pre-Feasibility Study on Concentrated Solar Power Plant for Restructuring Power System in Urban Areas of Bangladesh | Conference Proceedings | 10th IEEE International Conference on Power Systems (ICPS) | 2024 | Dr. Muhammad Sajjad Hossain | Department of Arts and Sciences | Paper Link |
Bifurcation, phase plane analysis and exact soliton solutions in the nonlinear Schrodinger equation with Atangana's conformable derivative | Journal Article | Chaos, Solitons & Fractals | 2024 | Dr. Muhammad Sajjad Hossain | Department of Arts and Sciences | Paper Link |
Free convection at different locations of adiabatic elliptic blockage in a square enclosure | Journal Article | Mathematical Modelling and Numerical Simulation with Applications | 2024 | Dr. Muhammad Sajjad Hossain | Department of Arts and Sciences | Paper Link |
On the applications of neural network technique for electro-viscoplastic Casson hybrid ferrofluid with a permeable channel | Journal Article | International Journal of Thermofluids | 2024 | Prof. Dr. Md. Masum Billah | Department of Arts and Sciences | Paper Link |
Statistical and numerical analysis of magnetic field effects on laminar natural convection heat transfer of nanofluid in a hexagonal cavity | Journal Article | International Journal of Thermofluids | 2024 | Prof. Dr. Md. Masum Billah | Department of Arts and Sciences | Paper Link |
Heat transfer augmentation in a double lid-driven trapezoidal porous cavity with heated block using hybrid nanofluid | Journal Article | International Journal of Thermofluids | 2024 | Prof. Dr. Md. Masum Billah | Department of Arts and Sciences | Paper Link |
The impact of multiple stenosis and aneurysms on arterial diseases: A cardiovascular study | Journal Article | Heliyon | 2024 | Prof. Dr. Md. Masum Billah | Department of Arts and Sciences | Paper Link |
Large eddy simulation of a turbulent channel flow using dynamic Samagorinsky subgrid scale model and differential equation wall model | Journal Article | International Journal of Thermofluids | 2024 | Mr. Mohammad Azizul Hoque | Department of Arts and Sciences | Paper Link |
[Under Review] Design, Experimental and Numerical Analysis of a Two Buoy Floating Wave Energy Convertor | Journal Article | Ocean Engineering | 2024 | Mr. Inzamam Ul Haq | Department of Mechanical and Production Engineering | |
Voice Outperforms Text in Identifying Personality Traits in Bangla: A Comparative Study | Conference Proceedings | 2024 27th International Conference on Computer and Information Technology (ICCIT) | 2024 | Mr. Md. Aminur Rahman | Department of Computer Science and Engineering | |
PROVABOK: Unveiling the Behavioral Impact of Social Media Influencers on Bangladeshi Youth | Conference Proceedings | 2024 27th International Conference on Computer and Information Technology (ICCIT) | 2024 | Mr. Md. Aminur Rahman | Department of Computer Science and Engineering | |
Towards Better Misogyny Detection in Bangla: Improved Dataset and Cutting-Edge Model Evaluation | Conference Proceedings | 2024 6th International Conference on Sustainable Technologies for Industry 5.0 (STI 2024) | 2024 | Mr. Md. Aminur Rahman | Department of Computer Science and Engineering | |
Celeb-FBI: A Benchmark Dataset on Human Full Body Images and Age, Gender, Height and Weight Estimation using Deep Learning Approach | Conference Proceedings | 3rd International Conference on Advanced Communication and Intelligent Systems (ICACIS 2024) | 2024 | Mr. Md. Aminur Rahman | Department of Computer Science and Engineering | Paper Link |
Explainable Lung Disease Classification from Chest X-Ray Images Utilizing Deep Learning and XAI | Conference Proceedings | 2024 IEEE 3rd International Conference on Computing and Machine Intelligence (ICMI) | 2024 | Mr. Shoeb Mohammad Shahriar | Department of Computer Science and Engineering | Paper Link |
Spatial inequities: Child-friendly spaces and ethnic sensitivity in Balukhali Rohingya 1 Refugee Camp, Cox’s Bazar, Bangladesh | Journal Article | FARU Journal | 2024 | Mr. S. M. Arafat Hossain | Department of Architecture | |
City within a City: Refugee Architecture for Cultural Void of the Rohingya Children at Balukhali Refugee Camp in Cox’s Bazar, Bangladesh. Malaysian Architectural Journal e-ISSN : 2716-6139 | Journal Article | Malaysian Architectural Journal | 2024 | Mr. S. M. Arafat Hossain | Department of Architecture | |
Magnetohydrodynamic mixed convective heat transfer augmentation in a rectangular lid-driven enclosure with a circular hollow cylinder utilizing nanofluids | Journal Article | International Journal of Thermofluids | 2024 | Dr. Kazi Ekramul Hoque | Department of Arts and Sciences | Paper Link |
Impact of Cerebral Aneurysm Wall Growth on Hemodynamic Parameters in Idealized Bifurcated Cerebral Arteries | Conference Proceedings | ICME 2023 | 2024 | Dr. Kazi Ekramul Hoque | Department of Arts and Sciences | Paper Link |
The impact of multiple stenosis and aneurysms on arterial diseases: A cardiovascular study | Journal Article | Heliyon (Elsevier) | 2024 | Dr. Kazi Ekramul Hoque | Department of Arts and Sciences | Paper Link |
Cardiac Progression of Biomechanical Risk Factor of Triple Vessel Disease and Biomedical Imaging on Right Coronary Arterial Hemodynamics | Journal Article | Austin Journal of Clinical Cardiology | 2024 | Dr. Kazi Ekramul Hoque | Department of Arts and Sciences | Paper Link |
Computational Simulation of Idealized Left Coronary Cardiac Structure with Bifurcation and Stenosis Topology | Journal Article | Austin Journal of Cardiovascular Disease & Atherosclerosis | 2024 | Dr. Kazi Ekramul Hoque | Department of Arts and Sciences | Paper Link |
Mechanical characterization of mulberry silk reinforced hybrid composite for enhanced application | Journal Article | Results in Materials | 2024 | Mr. Rezaul Karim Nayeem | Department of Mechanical and Production Engineering | Paper Link |
Exploring lean manufacturing drivers for enhancing circular economy performance in the pharmaceutical industry: a Bayesian best–worst approach | Journal Article | International Journal of Industrial Engineering and Operations Management | 2024 | Mr. Rezaul Karim Nayeem | Department of Mechanical and Production Engineering | Paper Link |
Machinability investigation of natural fibers reinforced polymer matrix composite under drilling: Leveraging machine learning in bioengineering applications | Journal Article | AIP Advances | 2024 | Mr. Rezaul Karim Nayeem | Department of Mechanical and Production Engineering | Paper Link |
Surface roughness and cutting force in turning of alkaline-treated banana fibre-reinforced polymer composite: Compressed air cutting | Journal Article | Journal of Reinforced Plastics and Composites | 2024 | Mr. Rezaul Karim Nayeem | Department of Mechanical and Production Engineering | Paper Link |
Additive manufacturing-based composites for sensors and other applications | Book | Materials Science and Materials Engineering | 2024 | Mr. Shah Md. Ashiquzzaman Nipu | Department of Mechanical and Production Engineering | Paper Link |
Machinability investigation of natural fibers reinforced polymer matrix composite under drilling: Leveraging machine learning in bioengineering applications | Journal Article | AIP Advances | 2024 | Mr. Shah Md. Ashiquzzaman Nipu | Department of Mechanical and Production Engineering | |
A new approach to inventory classification using a multi-criteria decision-making method to increase business efficiency | Journal Article | Int. J. Management Concepts and Philosophy | 2024 | Mr. Shah Md. Ashiquzzaman Nipu | Department of Mechanical and Production Engineering | |
FEM Simulation of Dry Machining Using Ansys Workbench | Conference Proceedings | 14th International Conference on Mechanical Engineering | 2024 | Dr. Md. Kharshiduzzaman | Department of Mechanical and Production Engineering | Paper Link |
Characterization of Mechanical Properties of Woven Jute, Kenaf & Woven E-Glass Hybrid Composite Laminates and their Response to Low Velocity Impact | Conference Proceedings | 14th International Conference on Mechanical Engineering | 2024 | Dr. Md. Kharshiduzzaman | Department of Mechanical and Production Engineering | Paper Link |
Stacking Sequence and Weight Fraction Effect on Tensile and Flexural Properties of Woven Jute and Woven Carbon-Jute Reinforced Polyester Composites | Conference Proceedings | IOP Conference Series: Materials Science and Engineering | 2024 | Dr. Md. Kharshiduzzaman | Department of Mechanical and Production Engineering | Paper Link |
Study on Exhaust Gas Characteristics of SI Engine Using Fuel (Gasoline) & HHO Gas | Conference Proceedings | IOP Conference Series: Materials Science and Engineering | 2024 | Dr. Md. Kharshiduzzaman | Department of Mechanical and Production Engineering | Paper Link |
Enhancement of Additively Manufactured Bagasse Fiber-Reinforced Composite Material Properties Utilizing a Novel Fiber Extraction Process Used for 3D SLA Printing | Journal Article | Journal of Manufacturing and Materials Processing | 2024 | Dr. Md. Kharshiduzzaman | Department of Mechanical and Production Engineering | Paper Link |
Tensile Properties of 3D-Printed Jute-Reinforced Composites via Stereolithography | Journal Article | Applied Mechanics | 2024 | Dr. Md. Kharshiduzzaman | Department of Mechanical and Production Engineering | Paper Link |
Extraction and characterization of biodiesel from waste cooking oil: An investigative approach based on the number of times used | Journal Article | Energy and Thermofluids Engineering | 2024 | Dr. Md. Kharshiduzzaman | Department of Mechanical and Production Engineering | Paper Link |
Evaluation of the Mechanical Properties of a Novel Hybrid Composite Composed of Rattan and Date Palm Fiber: An Experimental Study | Journal Article | Advances in Polymer Technology | 2024 | Dr. Md. Kharshiduzzaman | Department of Mechanical and Production Engineering | Paper Link |
Mechanical characterizations of waste face masks reinforced polyester composites: Recycling wastes into resources | Journal Article | Heliyon | 2024 | Dr. Fazlar Rahman | Department of Mechanical and Production Engineering | Paper Link |
Societal Impact of Recycling Waste into Composite Materials | Journal Article | Societal Impacts | 2024 | Dr. Fazlar Rahman | Department of Mechanical and Production Engineering | Paper Link |
Efect of Sesbania grandifora stem fber reinforcement on mechanical, chemical, thermal, and physical properties of vinyl ester material | Journal Article | Biomass Conversion and Biorefnery | 2024 | Dr. Fazlar Rahman | Department of Mechanical and Production Engineering | Paper Link |
Experimental and Numerical Study of Conical-Shaped Pin Finned Heat Sink with PCM Material | Journal Article | Malaysian Journal on Composites Science and Manufacturing | 2024 | Dr. Fazlar Rahman | Department of Mechanical and Production Engineering | Paper Link |
Measurement and Controlling Friction Force in a Sliding Microwire by Size and Boundary Condition Variation | Conference Proceedings | Proceedings of ICME 2023,14th International Conference on Mechanical Engineering, 18-19 December 2023, BUET, Dhaka | 2024 | Dr. Fazlar Rahman | Department of Mechanical and Production Engineering | |
Fundamental of Finite Element Analysis (FEA) and Solving Stiffness Matrix by Newton-Raphson Method | Journal Article | Journal of Mechanical Engineering, Transaction of the Mechanical Engineering Division, The Institution of Engineers, Bangladesh | 2024 | Dr. Fazlar Rahman | Department of Mechanical and Production Engineering | Paper Link |
Effect of fiber orientation on mechanical properties of betel nut (areca palm) stem fiber reinforced laminated polyester composites | Journal Article | Advances in Materials and Processing Technologies | 2024 | Dr. Fazlar Rahman | Department of Mechanical and Production Engineering | Paper Link |
Observing the deepwater environment using an underwater vehicle | Journal Article | World Journal of Advanced Research and Reviews | 2024 | Dr. Mohammad Harun-Or-Rashid | Department of Mechanical and Production Engineering | |
Numerical investigation of the effect of perforated almond, tunnel, and bishop shaped pin fin heat sinks on the hydrothermal performance enhancement | Journal Article | International Journal of Thermofluids | 2024 | Dr. Mohammad Harun-Or-Rashid | Department of Mechanical and Production Engineering | |
Energy efficient refrigeration system using latent heat storage, PCM | Journal Article | International Journal of Thermofluids | 2024 | Dr. Mohammad Harun-Or-Rashid | Department of Mechanical and Production Engineering | |
Development of a Low-Cost Fixed-Wing Unmanned Aerial Vehicle Through Simulation | Journal Article | Journal of Recent Activities in Production | 2024 | Dr. Mohammad Harun-Or-Rashid | Department of Mechanical and Production Engineering | |
Examine of the Characteristics of R134a Refrigerant Flowing Through a Capillary Tube | Journal Article | Journal of Mechanical and Mechanics Engineering | 2024 | Dr. Mohammad Harun-Or-Rashid | Department of Mechanical and Production Engineering | |
Impact of level 2 automation on driver behavior: A study using association rules mining | Journal Article | Transportation Research Part F: Traffic Psychology and Behaviour | 2024 | Mr. Syed Aaqib Javed | Department of Civil Engineering | Paper Link |
A critical analysis of wind energy generation potential in different regions of Bangladesh | Journal Article | Energy Reports | 2024 | Mr. Nahid-Ur-Rahman Chowdhury | Department of Electrical & Electronic Engineering | |
Applications of biocomposites—Tissue engineering and regenerative medicine | Book | Comprehensive Materials Processing (Second Edition) | 2024 | Mr. Zahid Hasan Shuvo | Department of Mechanical and Production Engineering | Paper Link |
Additive manufacturing-based composites for sensors and other applications | Book | Comprehensive Materials Processing (Second Edition) | 2024 | Mr. Zahid Hasan Shuvo | Department of Mechanical and Production Engineering | Paper Link |
Nanomaterials for sensors and other applications | Book | Comprehensive Materials Processing (Second Edition) | 2024 | Mr. Zahid Hasan Shuvo | Department of Mechanical and Production Engineering | Paper Link |
Investigating Spindle Tape Aging Effects on Ring Spun Yarn Quality: A Regression Analysis Approach | Journal Article | Fibers and Polymers | 2024 | Mr. Amit Chakrabortty | Department of Textile Engineering | Paper Link |
Investigating Carded Yarn Quality through Cross-Doubling in the Draw frame: A Comprehensive Analysis | Journal Article | Tekstilec | 2024 | Mr. Amit Chakrabortty | Department of Textile Engineering | Paper Link |
Assessing compliance with International Labor Organization convention No. 100 in Bangladesh's ready-made garments industry for sustainable development goal | Journal Article | Tekstilna industrija | 2024 | Mr. Amit Chakrabortty | Department of Textile Engineering | Paper Link |
Major Bridges of Bangladesh: Engineering Marvels and Infrastructural Icons | Journal Article | Journal of Recent Activities in Infrastructure Science | 2024 | Mr. Md. Munirul Islam | Department of Civil Engineering | Paper Link |
Numerical Investigation on the Effect of Partially-Inclined Reinforcement on the In-Plane Behavior of Shear-wall | Journal Article | Journal of Recent Activities in Infrastructure Science | 2024 | Mr. Md. Munirul Islam | Department of Civil Engineering | Paper Link |
Pre-Feasibility Study on Concentrated Solar Power Plant for Restructuring Power System in Urban Areas of Bangladesh | Conference Proceedings | 10th IEEE International Conference on Power Systems (ICPS), Bangladesh | 2024 | Mr. Safayat-Al-Imam | Department of Electrical & Electronic Engineering | Paper Link |
2D Nano Material Based Highly SPR Resonance Biosensor for Wide Ranged Hemoglobin Concentration Measurement | Conference Proceedings | Frontiers in Optics + Laser Science 2024 (FiO, LS) | 2024 | Mr. Safayat-Al-Imam | Department of Electrical & Electronic Engineering | Paper Link |
A Comparative Analysis of High-k Gate Dielectrics on 30nm Fully Depleted Silicon on Insulator (FD SOI) MOSFET and NMOS Devices | Conference Proceedings | 6th International Conference on Electrical Information and Communication Technology (EICT),Khulna, Bangladesh | 2024 | Mr. Safayat-Al-Imam | Department of Electrical & Electronic Engineering | Paper Link |
Analytical modeling of photocurrent in double perovskite Cs2AgBiBr6 X-ray detectors | Journal Article | Physica B: Condensed Matter | 2024 | Ms. Naznin Sultana | Department of Electrical & Electronic Engineering | Paper Link |
A Fuzzy Multi-Criteria Model with Pareto Analysis for Prioritizing Sustainable Supply Chain Barriers in the Textile Industry: Evidence from an Emerging Economy | Journal Article | Sustainable Operations and Computers | 2024 | Mr. Mohammad Faizur Rahman | Department of Textile Engineering | Paper Link |
Prioritising Yarn Quality Via Varying Top Roller Hardness: A Fuzzy Application | Journal Article | Textile & Leather Review | 2024 | Mr. Shahriar Raian | Department of Textile Engineering | Paper Link |
Synthesized Fluvial Stage Discharge and Sediment Rating of Jamuna River At Bahaduarabad | Conference Proceedings | Proceedings of 7 th International Conference on Civil Engineering for Sustainable Development-2024 | 2024 | Prof. Dr. Md. Abdul Matin | Department of Civil Engineering | |
A closed-form solution of BER for a convolutional coded non-Hermitian OFDM FSO system with polarization diversity | Journal Article | Journal of Optical Communications | 2024 | Mr. Md. Adnan Quaium | Department of Electrical & Electronic Engineering | Paper Link |
Energy Scavenging for IoT in Harsh Environments | Conference Proceedings | Energy Conference 2023: National & Global Issues (ENCON 23) | 2024 | Mr. Md. Adnan Quaium | Department of Electrical & Electronic Engineering | Paper Link |
Sustainable Urban Land-Water Interface Design: A Context-Sensitive Landscape Framework for Deltaic Region | Journal Article | Current Urban Studies, Vol 12, No 4, Pp 676-698. doi: 10.4236/cus.2024.124034. | 2024 | Dr. Ayasha Siddiqua | Department of Architecture | Paper Link |
Deep Learning-Based Feature Extraction from Children's Facial Images for Autism Spectrum Disorder Detection | Book | Proceedings of the Cognitive Models and Artificial Intelligence Conference | 2024 | Prof. Dr. Kazi A Kalpoma | Department of Computer Science and Engineering | Paper Link |
From Double Skin Façade to Closed Cavity Façade with Triple Glazed Unite as Inner Skin Without Coatings in the Tropical Climate of Malaysia | Journal Article | COMPENDIUM by paperASIA | 2024 | Ms. Maisha Durdana Mogna | Department of Architecture | Paper Link |
Effects of Cavity Depth of Glass Facades on energy performance of the office building façade scenarios of Dhaka City, Bangladesh | Journal Article | International Journal for Multidisciplinary Research (IJFMR) | 2024 | Ms. Maisha Durdana Mogna | Department of Architecture | Paper Link |
A Review on Existing Shear Design Provisions for Steel Fiber Reinforced Concrete Beams | Conference Proceedings | 7th International Conference on Civil Engineering for Sustainable Development (ICCESD 2024) | 2024 | Mr. Khan Abid Ahsan | Department of Civil Engineering | Paper Link |
Solar-Powered University Campus: A Blueprint for Sustainable Higher Education | Conference Proceedings | 2024 IEEE International Conference on Power System Technology (PowerCon) | 2024 | Dr. Taskin Jamal | Department of Electrical & Electronic Engineering | |
Electrifying Remote Communities in Malawi: Addressing Uncertainties in Design & Optimization of Hybrid Renewable Energy-Based System | Conference Proceedings | 2024 IEEE International Conference on Power System Technology (PowerCon) | 2024 | Dr. Taskin Jamal | Department of Electrical & Electronic Engineering | |
Empowering E-mobility: Day-ahead dynamic time of use tariff for electric vehicle charging | Journal Article | Energy Reports | 2024 | Dr. Taskin Jamal | Department of Electrical & Electronic Engineering | |
Maximizing Power Transfer in Transmission Networks with TCPS: A Non-Linear Programming-Genetic Algorithm Approach | Journal Article | Energy Reports | 2024 | Dr. Taskin Jamal | Department of Electrical & Electronic Engineering | |
Nexus of environmental accounting, sustainable production and financial performance: An integrated analysis using PLS-SEM, fsQCA, and NCA | Journal Article | Environmental Challenges, (Journal of Environmental Management) | 2024 | Mr. Md. Saheb Ali Mondal | School of Business | Paper Link |
Properties and Performance of Biopolymers in Textile Applications | Book | Biopolymers in the Textile Industry | 2024 | Mr. Md. Arif Mahmud | Department of Textile Engineering | Paper Link |
Prioritising Yarn Quality Via Varying Top Roller Hardness: A Fuzzy Application | Journal Article | Textile & Leather Review | 2024 | Mr. Kazi Rezwan Hossain | Department of Textile Engineering | Paper Link |
Properties and Performance of Biopolymers in Textile Applications | Others | 2024 | Mr. Kazi Rezwan Hossain | Department of Textile Engineering | Paper Link | |
Mechanical, Thermal and Morphological Characterization of Graphene/Al2O3-Reinforced Epoxy Hybrid Nanocomposites | Journal Article | Macromolecular Materials and Engineering | 2024 | Mr. Shadman Sharar Alam | Department of Mechanical and Production Engineering | Paper Link |
Extraction of Cellulosic Compound from Jackfruit Peel Waste and Characterization of PVA Cellulose Composite as Biodegradable Film | Journal Article | Journal of Engineering | 2024 | Mr. Shadman Sharar Alam | Department of Mechanical and Production Engineering | Paper Link |
Mechanical, Thermal, Chemical, and Physical Properties of Sponge Gourd Outer Skin Fiber-reinforced Vinyl Ester Composites | Journal Article | Biomass Conversion and Biorefinery | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Synthesis and Characterization of Nanocomposites for Tissue Engineering | Book | In Book: Comprehensive Materials Processing, 2E | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Recent Advances in Additive Manufacturing Techniques: An In-depth Review | Book | In Book: Comprehensive Materials Processing, 2E | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Biopolymers and Biopolymer-based Composites: Processing, Properties and Durability | Book | In Book: Comprehensive Materials Processing, 2E | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Progress in Sustainable Applications of Polymers and Biopolymers | Book | In Book: Comprehensive Materials Processing, 2E | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Recent Advances in Nanomaterials, Nanocomposite and Nanohybrids for Biomedical and Biosensing Applications | Book | In Book: Comprehensive Materials Processing, 2E | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Recent Developments in Functional Plant Fiber-based Composites and their Engineering Applications | Book | In Book: Comprehensive Materials Processing, 2E | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Progress in Recovery, Recycling and Reuse of Polymers, Biopolymers and their Composites | Book | In Book: Comprehensive Materials Processing, 2E | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Recent Advances in Simulation in Fiber-reinforced Polymer Composites: Mechanical Properties and Applications | Book | In Book: Comprehensive Materials Processing, 2E | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
A Comprehensive Study on the Advancements of Self-healing Materials | Book | In Book: Comprehensive Materials Processing, 2E | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Durability of FRP Bars under Varying Environmental Factors and Loading Conditions | Book | In Book: Comprehensive Materials Processing, 2E | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Advances in the Performance of Engineered Cementitious Composites under Extreme Conditions | Book | In Book: Comprehensive Materials Processing, 2E | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Modeling and Simulation on Additive Manufacturing of Composite Materials | Book | In Book: Comprehensive Materials Processing, 2E | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Advanced Nanocomposites for Sensing Applications | Book | In Book: Comprehensive Materials Processing, 2E | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Durability of Engineered Cementitious Composites under Extreme Conditions | Book | In Book: Comprehensive Materials Processing, 2E | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Recent Advances in Biobased Materials and their Applications | Book | In Book: Comprehensive Materials Processing, 2E | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Simulation and Modelling in Additive Manufacturing | Book | In Book: Comprehensive Materials Processing, 2E | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Composite Additive Manufacturing: An Overview of Current State, Limitations, and Progress | Book | In Book: Comprehensive Materials Processing, 2E | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Recent Advances in Additive Manufacturing of Ceramic and Graphene and their Applications | Book | In Book: Comprehensive Materials Processing, 2E | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
A Review on Additively Manufactured Materials in Biomedical Applications | Book | In Book: Comprehensive Materials Processing, 2E | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Hybrid Functional Materials and Their Applications | Book | In Book: Comprehensive Materials Processing, 2E | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Recent Development Trends on Polymeric Materials – Investigation of Properties and Applications | Book | In Book: Comprehensive Materials Processing, 2E | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Overview of Additive Manufacturing and Applications of 3D Printed Composites | Book | In Book: Comprehensive Materials Processing, 2E | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Sustainable Nanotechnology and Nanomaterials: Environmental and Biological Applications | Book | In Book: Comprehensive Materials Processing, 2E | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
2D Materials for Advanced Sensors: Synthesis and Applications | Book | In Book: Comprehensive Materials Processing, 2E | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Advanced Nanomaterials-based Biosensors for Clinical Diagnosis, Environmental Protection and Industrial Fermentation | Book | In Book: Comprehensive Materials Processing, 2E | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Polysaccharide Nanocomposites: Preparation, Properties and Applications | Book | In Book: Comprehensive Materials Processing, 2E | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Bioinspired Nanomaterials: From Synthesis to Applications | Book | In Book: Comprehensive Materials Processing, 2E | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Progress in Carbon Nanocomposites: Classification, Synthesis, and Applications | Book | In Book: Comprehensive Materials Processing, 2E | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Magnetic Nanoparticles: Synthesis, Characterization and Applications | Book | In Book: Comprehensive Materials Processing, 2E | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Nanomaterials for Sensors and Other Applications | Book | In Book: Comprehensive Materials Processing, 2E | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Recent Advancements in Nanostructured Biomaterials for Biomedical Applications and Regenerative Medicine | Book | In Book: Comprehensive Materials Processing, 2E | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Graphene and its Hybrid Materials: Properties and Applications | Book | In Book: Comprehensive Materials Processing, 2E | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Recent Advancements in Nanocarbon Derivatives: From Synthesis to Applications | Book | In Book: Comprehensive Materials Processing, 2E | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Carbon-based 2D and 3D Nanomaterials and Nanocomposites for Energy, Environmental and Biomedical Applications | Book | In Book: Comprehensive Materials Processing, 2E | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Functional Polymers for Sensors and Other Applications | Book | In Book: Comprehensive Materials Processing, 2E | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Recent Advances in MXene-based Nanocomposites: From Synthesis to Applications | Book | In Book: Comprehensive Materials Processing, 2E | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Applications of Biocomposites – Tissue Engineering and Regenerative Medicine | Book | In Book: Comprehensive Materials Processing, 2E | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Additive Manufacturing-based Composites for Sensors and Other Applications | Book | In Book: Comprehensive Materials Processing, 2E | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Durability Problems of Concrete Structures Rehabilitated with Fiber-Reinforced Polymer | Book | In Book: Eco-efficient Repair and Rehabilitation of Concrete Infrastructures | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Repairing Concrete Structures with Textile-reinforced Concrete | Book | In Book: Eco-efficient Repair and Rehabilitation of Concrete Infrastructures | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Recent Trends for Customisation of Sensor Materials for Biomedical Applications | Book | In Book: Comprehensive Materials Processing, 2E | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Carbon-based Nanomaterials and Nanocomposites Synthesis, Characterization, Properties and Applications: A Review | Book | In Book: Comprehensive Materials Processing, 2E | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Carbon Fiber: Composites and Applications | Book | In Book: Synthetic and Mineral Fibers, Their Composites and Applications | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Basalt fiber: Composites and Applications | Book | In Book: Synthetic and Mineral Fibers, Their Composites and Applications | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Synthetic and Mineral Fibers: Fundamentals and Composites Applications | Book | In Book: Synthetic and Mineral Fibers, Their Composites and Applications | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Hybrid Synthetic Fibers: Composites and Automotive Applications | Book | In Book: Synthetic and Mineral Fibers, Their Composites and Applications | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Manufacturing Advancements in Synthetic Fibers for Composite Technologies | Book | In Book: Synthetic and Mineral Fibers, Their Composites and Applications | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Recent Advances in Silicon Quantum Dots for Biological Applications | Book | In Book: Emerging Sustainable Nanomaterials and Their Biomedical Applications | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Carbon Nanotube-Polymer Nanocomposites for 3D Printing Technology | Book | In Book: Carbon Nanotube-Polymer Nanocomposites | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Metal- and Metal Oxide-based Nanomaterials: From Synthesis to Applications | Book | In Book: Comprehensive Materials Processing, 2E | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Agricultural Biomass-Based Activated Carbons for Efficient and Sustainable Supercapacitors | Journal Article | Journal of Energy Storage | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Fatigue Behavior of Textile-reinforced Concrete with Different Textile Types and Short Steel Fiber Contents | Journal Article | Construction and Building Materials | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Fabrication, Properties and Morphologies of Hybrid Polymer Composites Reinforced with Jute and Rosa Hybrida Fiber | Journal Article | Journal of Materials Science | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Multiscale Glass Fiber/Epoxy Nanocomposites Incorporated with Graphene and Zinc Oxide Nanoparticles: Enhanced Mechanical Properties | Journal Article | Macromolecular Materials and Engineering | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Effects of Temperature and Loading Rate on the Mechanical Performance of GFRP-Steel Single-lap Joints | Journal Article | Case Studies in Construction Materials | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Mechanical, Thermal, and Morphological Characterization of Graphene/Al2O3-reinforced Epoxy Hybrid Nanocomposites | Journal Article | Macromolecular Materials and Engineering | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Current and Emerging Directions in Green Nanomaterials: Synthesis, Physicochemical Properties and Applications | Journal Article | Materials Today Communications | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
A Feasibility Study of Using Low-Alkalinity Seawater Sea Sand Concrete to Improve the Long-term Bond Performance of the BFRP Bar in the Seawater Environment | Journal Article | Journal of Building Engineering | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Mechanical and Thermal Properties of Unidirectional Jute/Snake Plant Fiber-reinforced Epoxy Hybrid Composites | Journal Article | Industrial Crops and Products | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Eggshell Bio-filler Integration in Jute/Banana Fiber-reinforced Epoxy Hybrid Composites: Fabrication and Characterizations | Journal Article | Journal of Applied Polymer Science | 2024 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Developments in sensor materials, technologies and applications | Book | Reference Module in Materials Science and Materials Engineering | 2024 | Mr. Md. Araf Hossan | Department of Mechanical and Production Engineering | Paper Link |
Optimization of Hydrothermal Performance in Industrial Heat Sinks with Innovative Perforated Pin Fin Designs: A Numerical Approach | Journal Article | Heliyon | 2024 | Mr. Nabil Mohammad Chowdhury | Department of Mechanical and Production Engineering | Paper Link |
Numerical Investigation on Consecutive Charging and Discharging of PCM with Modified Longitudinal Fins in Shell and Tube Thermal Energy Storage | Journal Article | Results in Engineering | 2024 | Mr. Nabil Mohammad Chowdhury | Department of Mechanical and Production Engineering | |
A novel case of honeycomb shaped pin fin heat sink: CFD-data driven machine learning models for thermal performance prediction | Journal Article | Case Studies in Thermal Engineering | 2024 | Mr. Nabil Mohammad Chowdhury | Department of Mechanical and Production Engineering | Paper Link |
A novel pin finned structure-embedded microchannel heat sink: CFD-data driven MLP, MLR, and XGBR machine learning models for thermal and fluid flow prediction | Journal Article | Energy | 2024 | Mr. Nabil Mohammad Chowdhury | Department of Mechanical and Production Engineering | Paper Link |
Tailoring the performance of cellulosic textiles by chemical treatment and ionizing radiation: Assessment of physical, mechanical, thermal, crystal and morphological properties | Journal Article | Next Materials | 2024 | Ms. Nasrin Akter | Department of Textile Engineering | Paper Link |
Effect of natural thickener on printing performance over cotton woven fabric | Journal Article | Heliyon | 2024 | Ms. Nasrin Akter | Department of Textile Engineering | |
Effectofcotton-polyestercompositeyarnonthe physico-mechanicalandcomfortpropertiesofwovenfabric | Journal Article | Willey | 2024 | Ms. Nasrin Akter | Department of Textile Engineering | Paper Link |
Improving Occupational Health Condition and Implementing 5S in the Leather Tanning Industry: An Initiative Towards Sustainability | Conference Proceedings | 1st International Conference on Science and Technology for Sustainable Development 2024 (ICSTSD2024) | 2024 | Dr. Abu Hamja | Department of Mechanical and Production Engineering | |
Improving Occupational Health and Sustainability of Leather Industry in Bangladesh: An Initiative of SusLeather Project | Conference Proceedings | 1st International Conference on Science and Technology for Sustainable Development 2024 (ICSTSD2024) | 2024 | Dr. Abu Hamja | Department of Mechanical and Production Engineering | |
Numerical investigation of the enhancement of the aerodynamic performance for newly modified blended airfoils utilizing S809, S829, and NACA 2412 baseline shapes | Journal Article | Arabian Journal for Science and Engineering | 2024 | Dr. Abu Hamja | Department of Mechanical and Production Engineering | Paper Link |
A Comprehensive Analysis and Ranking of Barriers to implement lean practices in chemical management of Leather Tanning Industries in Bangladesh | Conference Proceedings | Proceedings of the 6th Industrial Engineering and Operations Management | 2024 | Dr. Abu Hamja | Department of Mechanical and Production Engineering | Paper Link |
Advanced Numerical Study on Natural Convection Heat Transfer in an Inverted T-Shaped Cavity Filled with Copper Nanofluid | Conference Proceedings | International Conference on Mechanical, Industrial and Energy Engineering | 2024 | Mr. Md. Shahjahan Durjoy | Department of Mechanical and Production Engineering | |
Influence of Dimple Orientation on Drag Characteristics of Circular Cylinder at Subsonic Flow | Conference Proceedings | International Conference on Mechanical, Industrial and Energy Engineering | 2024 | Mr. Md. Shahjahan Durjoy | Department of Mechanical and Production Engineering | |
Towards collaborative fair federated distillation | Journal Article | Engineering Applications of Artificial Intelligence | 2024 | Ms. Nawrin Tabassum | Department of Computer Science and Engineering | Paper Link |
On the Efficiency of Privacy Attacks in Federated Learning | Conference Proceedings | IEEE/CVF Conference on Computer Vision and Pattern Recognition (CVPR) Workshops | 2024 | Ms. Nawrin Tabassum | Department of Computer Science and Engineering | Paper Link |
Exploring lean manufacturing drivers for enhancing circular economy performance in the pharmaceuticals industry: a Bayesian best worst approach | Journal Article | International Journal of Industrial Engineering and Operations Management | 2024 | Ms. Sadia Hasanat | Department of Mechanical and Production Engineering | |
Bead-Free Electrospun Nanofibrous Scaffold Made of PVOH/Keratin/Chitosan Using a Box–Behnken Experimental Design and In Vitro Studies | Journal Article | Polysaccharides | 2024 | Dr. Mohammad Tajul Islam | Department of Textile Engineering | Paper Link |
Chitosan as a cationizing agent in pigment dyeing of cotton fabric | Journal Article | Carbohydrate Polymer Technologies and Applications | 2024 | Dr. Mohammad Tajul Islam | Department of Textile Engineering | Paper Link |
Single-bath-single-stage enzymatic treatment of denim | Journal Article | Results in Engineering | 2024 | Dr. Mohammad Tajul Islam | Department of Textile Engineering | Paper Link |
Functionalized Cellulose for Textile Organic Pollutant Treatment: a Comprehensive Review | Journal Article | Water Conservation Science and Engineering | 2024 | Dr. Mohammad Tajul Islam | Department of Textile Engineering | Paper Link |
Current trends in textile wastewater treatment—bibliometric review | Journal Article | Environmental Science and Pollution Research | 2024 | Dr. Mohammad Tajul Islam | Department of Textile Engineering | Paper Link |
Effect of core material draft ratio and denier on core spun yarn and denim fabric properties pre and post washing | Journal Article | Heliyon | 2024 | Dr. Mohammad Tajul Islam | Department of Textile Engineering | Paper Link |
Emerging iron-based mesoporous materials for adsorptive removal of pollutants: Mechanism, optimization, challenges, and future perspective | Journal Article | Chemosphere | 2024 | Dr. Mohammad Tajul Islam | Department of Textile Engineering | Paper Link |
Green extraction of dyes and pigments from natural resources | Book | Renewable Dyes and Pigments | 2024 | Dr. Mohammad Tajul Islam | Department of Textile Engineering | Paper Link |
Empowering E-Mobility: Day-Ahead Dynamic Time of Use Tariff for Electric Vehicle Charging | Journal Article | Energy Reports,Elsevier | 2024 | Ms. Silvia Tasnim | Department of Electrical & Electronic Engineering | Paper Link |
Maximizing Power Transfer in Transmission Networks with TCPS: A Non-linear Programming Genetic Algorithm Approach | Journal Article | Energy Reports,Elsevier | 2024 | Ms. Silvia Tasnim | Department of Electrical & Electronic Engineering | Paper Link |
Willingness of Buyers to Buy Wearable Rejected Clothes from Clothing Manufacturers: Model for Fostering Sustainable Apparel Business | Journal Article | Tekstilec | 2024 | Mr. Mohammad Ashraful Alam | Department of Textile Engineering | Paper Link |
Preliminary and detailed seismic evaluation of an existing RC building in Bangladesh: a case study | Journal Article | Innovative Infrastructure Solutions | 2024 | Dr. Debasish Sen | Department of Civil Engineering | Paper Link |
Flexural and Shear Strengthening of Reinforced-Concrete Beams with Ultra-High-Performance Concrete (UHPC) | Journal Article | Construction Materials | 2024 | Dr. Debasish Sen | Department of Civil Engineering | Paper Link |
Simulation of Lateral Behaviour of Un-strengthened and Ferrocement Strengthened Masonry Infilled RC Frame | Conference Proceedings | 18th World Conference on Earthquake Engineering | 2024 | Dr. Debasish Sen | Department of Civil Engineering | Paper Link |
A comparative investigation on experimental lateral behaviour of bare RC frame, non-strengthened and ferrocement strengthened masonry infilled RC frame | Journal Article | Bulletin of the New Zealand Society for Earthquake Engineering | 2024 | Dr. Debasish Sen | Department of Civil Engineering | Paper Link |
A numerical study on predicting bond-slip relationship of reinforced concrete using surface based cohesive behavior | Journal Article | Fracture and Structural Integrity | 2024 | Dr. Debasish Sen | Department of Civil Engineering | Paper Link |
Experimental investigation on the behavior of steel angle and strip jacketed RC column under eccentric loading | Journal Article | Journal of The Institution of Engineers (India): Series A | 2024 | Dr. Debasish Sen | Department of Civil Engineering | Paper Link |
Impact of Ownership Structure on Social and Environmental Disclosure: Evidence from Bangladesh Cement Industry | Conference Proceedings | International Conference on Environment, Social, and Governance Issues, Imperatives and Contemporary Business Perspectives | 2024 | Mr. Sharoar Khan | Department of Arts and Sciences | |
Municipal solid waste management: Identification and analysis of technology selection criteria using Fuzzy Delphi and Fuzzy DEMATEL technique | Journal Article | Heliyon | 2024 | Prof. Dr. Imtiaz Ahmed Choudhury | Department of Mechanical and Production Engineering | Paper Link |
Pathways to Advancing Sustainable Practices in Industrial Solid Waste Management: Unveiling Obstacles and Implications | Journal Article | Next Research | 2024 | Ms. Prattusha Bhattacharjee | Department of Mechanical and Production Engineering | Paper Link |
Thermoset and thermoplastic polymer composites reinforced with flax fiber: Properties and application—A review | Journal Article | SPE Polymers | 2024 | Ms. Fahmida-E-Karim | Department of Textile Engineering | Paper Link |
Assessing the Prospect of Sustainable Bio-composites Produced From Corn Starch and Reinforced With Jute Spinning Mills Waste | Journal Article | Advances in Materials Science and Engineering | 2024 | Ms. Fahmida-E-Karim | Department of Textile Engineering | Paper Link |
Analyze the Effect of Mingling Chamber (60z and 92z2 Made of Copper) on Splice Strength and Appearance in Air and Water Mode | Journal Article | Journal of The Institution of Engineers (India): Series E. | 2024 | Ms. Fahmida-E-Karim | Department of Textile Engineering | Paper Link |
Splitting and authentication of the newest retrieved cellulose-rich organic fiber from the exterior layer of Bangladeshi palmyra seed sprouts | Journal Article | RSC Advances | 2024 | Ms. Fahmida-E-Karim | Department of Textile Engineering | Paper Link |
Thermoset and thermoplastic polymer composite with date palm fiber and its behavior: A review | Journal Article | SPE Polymers | 2024 | Ms. Fahmida-E-Karim | Department of Textile Engineering | Paper Link |
Preparation and characterization of MgO-based composites: Analysis of moisture, corrosion, and fungal resistance, and mechanical properties | Journal Article | Construction and building materials | 2024 | Ms. Fahmida-E-Karim | Department of Textile Engineering | Paper Link |
Developing and Screening of a Bacteria-Fighting and Moisture-Controlling Coccinia grandis and Poly(vinyl alcohol) Electrospun Nanofibrous Mat | Journal Article | ACS OMEGA | 2024 | Ms. Fahmida-E-Karim | Department of Textile Engineering | Paper Link |
Assessing the consequences of water retention on the structural integrity of jute fiber and its composites: A review | Journal Article | SPE Polymers | 2024 | Ms. Fahmida-E-Karim | Department of Textile Engineering | Paper Link |
Sustainable development of three distinct starch based bio-composites reinforced with the cotton spinning waste collected from fiber preparation stage | Journal Article | Heliyon | 2024 | Ms. Fahmida-E-Karim | Department of Textile Engineering | Paper Link |
Optimizing yarn properties through response surface methodology: Finding the ideal flax and cotton fiber proportion in blended yarns by using design-expert software | Journal Article | SPE Polymers | 2024 | Ms. Fahmida-E-Karim | Department of Textile Engineering | Paper Link |
Statistical analysis of Cotton-Jute blended ratio for producing good quality blended yarn | Journal Article | Heliyon | 2024 | Ms. Fahmida-E-Karim | Department of Textile Engineering | Paper Link |
Surface modification of Luffa and Maize fibers by using alkali medium | Journal Article | Cleaner Engineering and Technology | 2024 | Ms. Fahmida-E-Karim | Department of Textile Engineering | Paper Link |
A review of existing research works on ball burnishing based on tools and work materials | Journal Article | 1st IUT International Conference on Mechanical, Materials, and Production Engineering (IUT-ICMMPE), | 2024 | Ms. Rafia Islam | Department of Mechanical and Production Engineering | Paper Link |
A Comparative Analysis of Noise Reduction Methods in Sentiment Analysis on Noisy Bangla Texts | Others | The 9th Workshop on Noisy and User-generated Text (W-NUT) | 2024 | Ms. Tasnuva Binte Rahman | Department of Computer Science and Engineering | Paper Link |
Thermo-mechanical performance of wolframite mineral reinforced siloxane-modified epoxy-based intumescent coating for structural steel | Journal Article | Polymers for Advanced Technologies | 2024 | Mr. Chowdhury Ahmed Shahed | Department of Mechanical and Production Engineering | |
Mechanical Investigation of Kenaf/Carbon Hybrid Composites for Building and Construction Applications | Journal Article | Journal of Composites for Construction | 2024 | Mr. Chowdhury Ahmed Shahed | Department of Mechanical and Production Engineering | |
Mechanical property enhancement of graphene-kenaf-epoxy multiphase composites for automotive applications | Journal Article | Composites Part A: Applied Science and Manufacturing | 2024 | Mr. Chowdhury Ahmed Shahed | Department of Mechanical and Production Engineering | Paper Link |
Eco-friendly biopolishing of cotton fabric through wasted sugarcane bagasse-derived enzymes | Journal Article | Heliyon | 2024 | Mr. Md. Shah Ikbal | Department of Textile Engineering | Paper Link |
Novel activated carbon derived from a sustainable and low-cost palm leaves biomass waste for tetracycline removal: Adsorbent preparation, adsorption mechanisms and real application | Journal Article | Diamond and Related Materials | 2024 | Dr. Md. Aminul Islam | Department of Arts and Sciences | Paper Link |
High performance adsorptive removal of emerging contaminant paracetamol using a sustainable biobased mesoporous activated carbon prepared from palm leaves waste | Journal Article | Journal of Analytical and Applied Pyrolysis (Q1, IF 6) | 2024 | Dr. Md. Aminul Islam | Department of Arts and Sciences | Paper Link |
Sustainable bio-based mesoporous activated carbon derived from palm leaves biomass waste for removal of emerging contaminant paracetamol | Conference Proceedings | American Chemical Society (ACS) Fall 2024, 18-22 August 2024, Denver, Colorado, USA | 2024 | Dr. Md. Aminul Islam | Department of Arts and Sciences | Paper Link |
Investigation of tetracycline adsorption onto sustainable and low-cost palm leaves biomass waste derived activated carbon: Kinetics, adsorption mechanism, and real application | Conference Proceedings | American Chemical Society (ACS) Fall 2024, 18-22 August 2024, Denver, Colorado, USA | 2024 | Dr. Md. Aminul Islam | Department of Arts and Sciences | Paper Link |
Recent advances in the adsorptive removal of tetracycline from aqueous solution | Conference Proceedings | BCSIR Congress-2023, 08-10 March 2024, Bangladesh Council of Scientific and Industrial Research (BCSIR), Dhaka, Bangladesh | 2024 | Dr. Md. Aminul Islam | Department of Arts and Sciences | Paper Link |
Adsorptive removal of paracetamol from aqueous media: A comprehensive review of adsorbent materials, adsorption mechanisms, recent advancements, and future perspectives, Q1, IF 6.63 | Journal Article | Journal of Molecular Liquids | 2024 | Dr. Md. Aminul Islam | Department of Arts and Sciences | Paper Link |
A novel glutaraldehyde cross-linked chitosan@acid-activated bentonite composite for effective Pb (II) and Cr (VI) adsorption: Experimental and theoretical studies, Q1, IF 8.6 | Journal Article | Separation and Purification Technology | 2024 | Dr. Md. Aminul Islam | Department of Arts and Sciences | Paper Link |
Emerging iron-based mesoporous materials for adsorptive removal of pollutants: Mechanism, optimization, challenges, and future perspective, IF: 8.8, Q1 | Journal Article | Chemosphere | 2024 | Dr. Md. Aminul Islam | Department of Arts and Sciences | Paper Link |
HOLISTIC MARKETING AND SUSTAINABILITY: INSIGHTS FROM A BIBLIOMETRIC ANALYSIS OF GLOBAL RESEARCH | Journal Article | BANGLADESH JOURNAL OF MULTIDISCIPLINARY SCIENTIFIC RESEARCH | 2024 | Prof. Dr. Wahiduzzaman Khan | School of Business | Paper Link |
Investigating Spindle Tape Aging Efects on Ring Spun Yarn Quality: A Regression Analysis Approach | Journal Article | Fibers and Polymers | 2024 | Mr. Jamal Hossen | Department of Textile Engineering | Paper Link |
Prioritising Yarn Quality Via Varying Top Roller Hardness: A Fuzzy Application | Journal Article | Textile & Leather Review | 2024 | Mr. Jamal Hossen | Department of Textile Engineering | Paper Link |
A Transformed Blueprint for Memory Devices in Integrated DNA - Quantum Computing | Conference Proceedings | IEEE Computer Society Bangladesh Chapter Symposium 2024 | 2024 | Ms. Tamanna Tabassum | Department of Computer Science and Engineering | Paper Link |
A Optimized Reversible design for programmable array logic based on Quantum Computing nanotechnology | Conference Proceedings | 5th International Conference on Electrical and Electronics Engineering (ICEEE) | 2024 | Ms. Tamanna Tabassum | Department of Computer Science and Engineering | |
Designing an Integrated Multi Echelon, Multi-Period Healthcare Supply Chain Network | Conference Proceedings | 51st International Conference on Computers and Industrial Engineering (CIE51) | 2024 | Mr. Rafat Rahman | Department of Mechanical and Production Engineering | |
Embracing Sustainability in Green Supplier Evaluation: A Novel Integrated Multi-Criteria Decision-Making Framework | Journal Article | Contemporary Mathematics | 2024 | Mr. Rafat Rahman | Department of Mechanical and Production Engineering | Paper Link |
Exploring lean manufacturing drivers for enhancing circular economy performance in the pharmaceutical industry: a Bayesian best–worst approach | Journal Article | International Journal of Industrial Engineering and Operations Management | 2024 | Mr. Rafat Rahman | Department of Mechanical and Production Engineering | Paper Link |
Towards the adoption of AI, IoT, and Blockchain technologies in Bangladesh's maritime industry: Challenges and insights | Journal Article | Results in Engineering | 2024 | Mr. Sheak Salman | Department of Mechanical and Production Engineering | Paper Link |
The pathways to lean manufacturing for circular economy: Implications for sustainable development goals | Journal Article | Journal of Responsible Production and Consumption | 2024 | Mr. Sheak Salman | Department of Mechanical and Production Engineering | Paper Link |
Machinability investigation of natural fibers reinforced polymer matrix composite under drilling: Leveraging machine learning in bioengineering applications | Journal Article | AIP Advances | 2024 | Mr. Sheak Salman | Department of Mechanical and Production Engineering | Paper Link |
Exploring lean manufacturing drivers for enhancing circular economy performance in the pharmaceutical industry: a Bayesian best–worst approach | Journal Article | International Journal of Industrial Engineering and Operations Management | 2024 | Mr. Sheak Salman | Department of Mechanical and Production Engineering | Paper Link |
Properties and Performance of Biopolymers in Textile Applications | Book | Biopolymers in the Textile Industry | 2024 | Ms. Sharmin Akter | Department of Textile Engineering | Paper Link |
Unmasking Harmful Comments: An Approach to Text Toxicity Classification Using Machine Learning in Native Language | Conference Proceedings | 2024 International Conference on Innovation and Intelligence for Informatics, Computing, and Technologies (3ICT) | 2024 | Ms. Afia Ahsan | Department of Mechanical and Production Engineering | Paper Link |
A pythagorean fuzzy approach to evaluate the challenges to implementing circular economy in the glass manufacturing industry: Implications for sustainable development | Journal Article | Results in Engineering | 2024 | Ms. Afia Ahsan | Department of Mechanical and Production Engineering | Paper Link |
Exploring lean manufacturing drivers for enhancing circular economy performance in the pharmaceutical industry: a Bayesian best–worst approach | Journal Article | International Journal of Industrial Engineering and Operations Management | 2024 | Ms. Afia Ahsan | Department of Mechanical and Production Engineering | Paper Link |
Integrating Supply Chain Partners through Implementing Industry 4.0 Technologies to Enhance Competitiveness | Journal Article | Jordan Journal of Mechanical and Industrial Engineering | 2024 | Mr. Rafid Ahmed Chowdhury | Department of Mechanical and Production Engineering | Paper Link |
"A review of existing research works on ball burnishing based on tools and work materials" | Journal Article | Journal of Engineering and Technology (JET) | 2024 | Mr. Ashraf Siddiquee Ashrafee | Department of Mechanical and Production Engineering | Paper Link |
Investigation of thermal conductivity of partial periodic Si/Ge superlattice in Si nanowire | Conference Proceedings | ASME 2024 International Mechanical Engineering Congress and Exposition | 2024 | Mr. Azmir Hasan Mojumder | Department of Mechanical and Production Engineering | |
Preparation of a chiral hyperbranched polymer based on cinchona alkaloids and investigation of its catalytic activity in asymmetric reactions | Journal Article | Turkish Journal of Chemistry | 2024 | Dr. Mohammad Shahid Ullah | Department of Arts and Sciences | Paper Link |
Tensile Properties of 3D-Printed Jute-Reinforced Composites via Stereolithography | Journal Article | Applied Mechanics | 2024 | Dr. Md. Shahnewaz Bhuiyan | Department of Mechanical and Production Engineering | Paper Link |
Efect of Sesbania grandifora stem fber reinforcement on mechanical, chemical, thermal, andphysical properties of vinyl ester material | Journal Article | Biomass Conversion and Biorefinery | 2024 | Dr. Md. Shahnewaz Bhuiyan | Department of Mechanical and Production Engineering | Paper Link |
Evaluation of the Mechanical Properties of a Novel Hybrid Composite Composed of Rattan and Date Palm Fiber: An Experimental Study | Journal Article | Advances in Polymer Technology | 2024 | Dr. Md. Shahnewaz Bhuiyan | Department of Mechanical and Production Engineering | Paper Link |
Enhancement of Additively Manufactured Bagasse Fiber-Reinforced Composite Material Properties Utilizing a Novel Fiber Extraction Process Used for 3D SLA Printing | Journal Article | Journal of Manufacturing and Materials Processing | 2024 | Dr. Md. Shahnewaz Bhuiyan | Department of Mechanical and Production Engineering | Paper Link |
FEM Simulation of Dry Machining Using Ansys Workbench | Conference Proceedings | Proceedings of ICME 2023 14th International Conference on Mechanical Engineering, SSRN | 2024 | Dr. Md. Shahnewaz Bhuiyan | Department of Mechanical and Production Engineering | Paper Link |
Characterization of Mechanical Properties of Woven Jute, Kenaf & Woven E-Glass Hybrid Composite Laminates and their Response to Low Velocity Impact | Conference Proceedings | Proceedings of ICME 2023 14th International Conference on Mechanical Engineering 18-19 December 2023, BUET, Dhaka, Bangladesh | 2024 | Dr. Md. Shahnewaz Bhuiyan | Department of Mechanical and Production Engineering | Paper Link |
Stacking Sequence and Weight Fraction Effect on Tensile and Flexural Properties of Woven Jute and Woven Carbon-Jute Reinforced Polyester Composites | Conference Proceedings | IOP Conf. Series: Materials Science and Engineering | 2024 | Dr. Md. Shahnewaz Bhuiyan | Department of Mechanical and Production Engineering | Paper Link |
Mapping Digitally Enabled Sustainable Practices in Fashion Manufacturing to Scale Up Circularity | Conference Proceedings | Digital Fashion Innovation Conference(DFIC) | 2024 | Mr. Md. Faisal Mahmud | Department of Textile Engineering | |
Application of Low-Temperature Air Plasma for the Enhancement of Defense Fabric’s Self-Cleaning Property | Journal Article | ACS Omega | 2024 | Mr. Md. Faisal Mahmud | Department of Textile Engineering | Paper Link |
Artificial Intelligence (AI) in sustainable textile processing chain: scopes, challenges, and opportunities | Conference Proceedings | Digital Fashion Innovation Conference (DFIC) | 2024 | Mr. Md. Faisal Mahmud | Department of Textile Engineering | |
Development of conductive polymer coated textiles for pressure and strain sensors | Book | The Textile Institute Book Series on Advances in Electrically Conductive Textiles | 2024 | Mr. Md. Faisal Mahmud | Department of Textile Engineering | |
NeuroMindscape: Deep Learning Unraveling Alzheimer's Stages through MRI-Based Classification | Conference Proceedings | 3rd International Conference on Power, Electrical, Electronics and Industrial Applications (PEEIACON) | 2024 | Ms. Tanjila Broti | Department of Computer Science and Engineering | |
Generating Robust Cryptographic Keys using Crossover Ring Oscillator PUFs: Resilience against Machine Learning Attacks | Conference Proceedings | 2024 15th International Conference on Computing Communication and Networking Technologies (ICCCNT) | 2024 | Dr. Fakir Sharif Hossain | Department of Electrical & Electronic Engineering | Paper Link |
Glitch Variability Aware Power Side-Channel for Detecting Hardware Trojans | Conference Proceedings | 2024 International Conference on Advances in Computing, Communication, Electrical, and Smart Systems (iCACCESS) | 2024 | Dr. Fakir Sharif Hossain | Department of Electrical & Electronic Engineering | Paper Link |
A dependable and resource-frugal ring oscillator physically unclonable function | Journal Article | International Journal of Electronics | 2024 | Dr. Fakir Sharif Hossain | Department of Electrical & Electronic Engineering | Paper Link |
A new topology of non-isolated AC-DC quadratic boost converter with enhanced power traits | Journal Article | Bulletin of Electrical Engineering and Informatics | 2024 | Mr. Shameem Hasan | Department of Electrical & Electronic Engineering | Paper Link |
Predictive Analysis and Forecasting of Source-Wise Power Generation in Bangladesh with Machine Learning Technique | Conference Proceedings | 2023 IEEE 11th Region 10 Humanitarian Technology Conference (R10-HTC) | 2024 | Mr. Shameem Hasan | Department of Electrical & Electronic Engineering | Paper Link |
Forecasting and predictive analysis of source-wise power generation along with economic aspects for developed countries | Journal Article | Energy Conversion and Management: X, ELSEVIER | 2024 | Mr. Shameem Hasan | Department of Electrical & Electronic Engineering | Paper Link |
Comparative techno-economic analyses and optimization of standalone and grid-tied renewable energy systems for South Asia and Sub-Saharan Africa | Journal Article | Results in Engineering - ELSEVIER | 2024 | Mr. Shameem Hasan | Department of Electrical & Electronic Engineering | Paper Link |
SEISMIC BEHAVIOR OF MULTI-STORIED RC BUILDING WITH RE-ENTRANT CORNER | Journal Article | Jurnal Teknologi (sciences and Engineering) | 2024 | Mr. Raisul Islam Shuvo | Department of Civil Engineering | Paper Link |
Hybrid synthetic fibers: composites and automotive applications | Book | In book: Synthetic and Mineral Fibers, Their Composites and Applications | 2024 | Mr. Mohammad Ali Noor Zaman | Department of Mechanical and Production Engineering | Paper Link |
Recent trends in the customization of sensor materials for biomedical applications | Book | In Book: Materials Science and Materials Engineering | 2024 | Mr. Mohammad Ali Noor Zaman | Department of Mechanical and Production Engineering | Paper Link |
Performance Analysis of Deep Learning Models on Chemokines Protein Group Using Structure-Based Pattern Detection | Book | Advances in Artificial Intelligence-Empowered Decision Support Systems, Learning and Analytics in Intelligent Systems Book | 2024 | Prof. Dr. Md. Shamim Akhter | Department of Computer Science and Engineering | Paper Link |
Leveraging Data Efficient Image Transformer (DeIT) for Road Crack Detection and Classification | Conference Proceedings | International Conference on Advances in Computing, Communication, Electrical, and Smart Systems (iCACCESS) | 2024 | Prof. Dr. Md. Shamim Akhter | Department of Computer Science and Engineering | Paper Link |
Mask Attention-Based Vision Transformer (MA-ViT) for PCB Defect Detection | Conference Proceedings | 2024 International Conference on Emerging Smart Computing and Informatics (ESCI) | 2024 | Prof. Dr. Md. Shamim Akhter | Department of Computer Science and Engineering | Paper Link |
Revisiting the Shear Design Provisions for FRP-RC Deep Beams Without Stirrups | Journal Article | Proceedings of the 2nd International Conference on Advances in Civil Infrastructure and Construction Materials (CICM 2023) | 2024 | Mr. Md. Fazla Rabbi Anik | Department of Civil Engineering | Paper Link |
Study on carbonation of low strength concrete made of brick aggregate | Journal Article | Case Studies in Construction Materials | 2024 | Mr. Md. Fazla Rabbi Anik | Department of Civil Engineering | Paper Link |
Structural behavior of CFRP wrapped circular hollow bridge piers under cyclic loading considering local buckling limit state | Journal Article | Asian Journal of Civil Engineering | 2024 | Mr. Md. Fazla Rabbi Anik | Department of Civil Engineering | Paper Link |
High-Efficient Dynamic Logic Circuit Design | Journal Article | MAT Journals | 2024 | Ms. Abeer Khan | Department of Electrical & Electronic Engineering | |
COMPARATIVE STUDY OF RC SHEAR WALL AND TRUSS BELT SYSTEM IN A MULTI-STOREY STRUCTURE WITH PLAN IRREGULARITIES | Conference Proceedings | 7th International Conference on Advances in Civil Engineering (ICACE2024) | 2024 | Mr. Razesh Kanti Sarkar | Department of Civil Engineering | Paper Link |
Finite Element Analysis of Circular Steel Concrete Cmposite Column | Journal Article | International Journal For Multidisciplinary Research | 2024 | Mr. Razesh Kanti Sarkar | Department of Civil Engineering | Paper Link |
Sustainable Pavement Construction: A Comprehensive Overview of Waste Plastic Utilization in Bituminous Mixtures | Journal Article | International Journal of Applied Engineering & Technology | 2024 | Mr. Razesh Kanti Sarkar | Department of Civil Engineering | Paper Link |
Modal Analysis of Tall Building with and without Shear Wall | Conference Proceedings | 7th International Conference on Civil Engineering and Sustainable Development (ICCESD 2024) | 2024 | Mr. Razesh Kanti Sarkar | Department of Civil Engineering | |
Assessment of the Perception of Commuters Toward Service Quality of Mass Rapid Transit in Dhaka City, Bangladesh | Conference Proceedings | 7th International Conference on Civil Engineering and Sustainable Development (ICCESD 2024) | 2024 | Mr. Razesh Kanti Sarkar | Department of Civil Engineering | |
Performance Evaluation of Turbo-Round in Heterogeneous Traffic Condition of a Developing Country | Conference Proceedings | 7th International Conference on Civil Engineering and Sustainable Development (ICCESD 2024) | 2024 | Mr. Razesh Kanti Sarkar | Department of Civil Engineering | |
Electronic transport in amorphous Ge2Sb2Te5 phase-change memory line cells and its response to photoexcitation | Journal Article | Applied Physics Letters | 2024 | Dr. Md. Tashfiq Bin Kashem | Department of Electrical & Electronic Engineering | |
Resistance Drift in Melt-Quenched Ge2Sb2Te5 Phase Change Memory Line Cells at Cryogenic Temperatures | Journal Article | ECS Journal of Solid State Science and Technology | 2024 | Dr. Md. Tashfiq Bin Kashem | Department of Electrical & Electronic Engineering | |
Thermoset and thermoplastic polymer composites reinforced with flax fiber: Properties and application—A review | Journal Article | SPE Polymers | 2024 | Mr. Md. Redwanul Islam | Department of Textile Engineering | Paper Link |
Assessing the Prospect of Sustainable Biocomposites Produced From Corn Starch and Reinforced With Jute Spinning Mills Waste | Journal Article | Advances in Materials Science and Engineering | 2024 | Mr. Md. Redwanul Islam | Department of Textile Engineering | Paper Link |
Analyze the Effect of Mingling Chamber (60z and 92z2 Made of Copper) on Splice Strength and Appearance in Air and Water Mode | Journal Article | Journal of The Institution of Engineers (India): Series E | 2024 | Mr. Md. Redwanul Islam | Department of Textile Engineering | Paper Link |
Splitting and authentication of the newest retrieved cellulose-rich organic fiber from the exterior layer of Bangladeshi palmyra seed sprouts | Journal Article | RSC Advances | 2024 | Mr. Md. Redwanul Islam | Department of Textile Engineering | Paper Link |
Thermoset and thermoplastic polymer composite with date palm fiber and its behavior: A review | Journal Article | SPE Polymers | 2024 | Mr. Md. Redwanul Islam | Department of Textile Engineering | Paper Link |
Developing and Screening of a Bacteria-Fighting and Moisture-Controlling Coccinia grandis and Poly(vinyl alcohol) Electrospun Nanofibrous Mat | Journal Article | ACS OMEGA | 2024 | Mr. Md. Redwanul Islam | Department of Textile Engineering | Paper Link |
Assessing the consequences of water retention on the structural integrity of jute fiber and its composites: A review | Journal Article | SPE Polymers | 2024 | Mr. Md. Redwanul Islam | Department of Textile Engineering | Paper Link |
Sustainable development of three distinct starch based bio-composites reinforced with the cotton spinning waste collected from fiber preparation stage | Journal Article | Heliyon | 2024 | Mr. Md. Redwanul Islam | Department of Textile Engineering | Paper Link |
Optimizing yarn properties through response surface methodology: Finding the ideal flax and cotton fiber proportion in blended yarns by using design-expert software | Journal Article | SPE Polymers | 2024 | Mr. Md. Redwanul Islam | Department of Textile Engineering | Paper Link |
Surface modification of Luffa and Maize fibers by using alkali medium | Journal Article | Cleaner Engineering and Technology | 2024 | Mr. Md. Redwanul Islam | Department of Textile Engineering | Paper Link |
Statistical analysis of Cotton-Jute blended ratio for producing good quality blended yarn | Journal Article | Heliyon | 2024 | Mr. Md. Redwanul Islam | Department of Textile Engineering | Paper Link |
Bengali fake reviews: A benchmark dataset and detection system | Journal Article | Neurocomputing | 2024 | Mr. Md. Tanvir Rouf Shawon | Department of Computer Science and Engineering | Paper Link |
Rank Your Summaries: Enhancing Bengali Text Summarization Via Ranking-Based Approach | Conference Proceedings | 2nd International Conference on Big Data, IoT and Machine Learning | 2024 | Mr. Md. Tanvir Rouf Shawon | Department of Computer Science and Engineering | Paper Link |
A Comparative Analysis of Noise Reduction Methods in Sentiment Analysis on Noisy Bangla Texts | Others | 2024 The 9th Workshop on Noisy and User-generated Text (W-NUT) | 2024 | Mr. Md. Tanvir Rouf Shawon | Department of Computer Science and Engineering | Paper Link |
Bengali Speech Sentiment Analysis Using Machine Learning Models: A Comparative Study | Conference Proceedings | 2024 IEEE International Conference on Artificial Intelligence in Engineering and Technology (IICAIET) | 2024 | Mr. Md. Reasad Zaman Chowdhury | Department of Computer Science and Engineering | Paper Link |
Production of syngas from oil palm shell biomass using microwave gasification | Journal Article | Energy | 2024 | Dr. Istiaq Jamil Siddique | Department of Mechanical and Production Engineering | Paper Link |
Numerical Simulation of Microwave Heating of Cylindrical Shaped Biomass Material | Conference Proceedings | 14th International Conference on Mechanical Engineering (ICME 2023) | 2024 | Dr. Istiaq Jamil Siddique | Department of Mechanical and Production Engineering | Paper Link |
Hydro-Thermal and Entropy Generation Effects of Helical Tube Heat Exchanger across Different Dean Numbers with Novel Filleted-Hexagonal Profile using Sio2-Zno/Water Hybrid Nanofluid | Conference Proceedings | 14th International Conference on Mechanical Engineering (ICME 2023) | 2024 | Dr. Istiaq Jamil Siddique | Department of Mechanical and Production Engineering | Paper Link |
Nexus of environmental accounting, sustainable production and financial performance: An integrated analysis using PLS-SEM, fsQCA, and NCA | Journal Article | Environmental Challenges, (Journal of Environmental Management) | 2024 | Ms. Nazma Akter | School of Business | Paper Link |
Disruptive supply chain technology assessment for sustainability journey: A framework of probabilistic group decision making | Journal Article | Heliyon | 2024 | Mr. Hasin Md. Muhtasim Taqi | Department of Mechanical and Production Engineering | Paper Link |
Extraction of Cellulosic Compound from Jackfruit Peel Waste and Characterization of PVA Cellulose Composite as Biodegradable Film | Journal Article | Journal of Engineering | 2024 | Mr. Aquib Rahman | Department of Mechanical and Production Engineering | Paper Link |
Numerical Analysis of Different Passive Microfluidic Channels for Enhanced Fluid Transportation | Journal Article | JOURNAL OF ENGINEERING AND TECHNOLOGY (JET) | 2024 | Mr. Aquib Rahman | Department of Mechanical and Production Engineering | Paper Link |
Comprehensive Lung Disease Detection Using Deep Learning Models and Hybrid Chest X-ray Data with Explainable AI | Conference Proceedings | International Conference on Computer and Information Technology | 2024 | Mr. Raihan Tanvir | Department of Computer Science and Engineering | |
Stacking Sequence and Weight Fraction Effect on Tensile and Flexural Properties of Woven Jute and Woven Carbon-Jute Reinforced Polyester Composites | Conference Proceedings | Materials Science and Engineering | 2024 | Mr. Golam Fahim | Department of Mechanical and Production Engineering | Paper Link |
Recent trends in the customization of sensor materials for biomedical applications | Book | Elsevier Reference Collection in Materials Science and Materials Engineering | 2024 | Mr. Golam Fahim | Department of Mechanical and Production Engineering | Paper Link |
Technical and economic evaluation of a grid connected hybrid system in Gazipur, Bangladesh | Conference Proceedings | 2024 7th International Conference on Development in Renewable Energy Technology (ICDRET) | 2024 | Mr. Imran Rahman | Department of Electrical & Electronic Engineering | Paper Link |
A prospective approach for human-to-human interaction recognition from Wi-Fi channel data using attention bidirectional gated recurrent neural network with GUI application implementation | Journal Article | Multimedia Tools and Applications | 2024 | Mr. Md Mohi Uddin Khan | Department of Electrical & Electronic Engineering | Paper Link |
Empirical Investigation of A Single-phase Input Switched AC-DC Boost Converter with Improved Power Quality | Journal Article | e-Prime-Advances in Electrical Engineering, Electronics and Energy | 2024 | Mr. Ferdous S. Azad | Department of Electrical & Electronic Engineering | |
A new topology of non-isolated AC-DC quadratic boost converter with enhanced power traits | Journal Article | Bulletin of Electrical Engineering and Informatics | 2024 | Mr. Ferdous S. Azad | Department of Electrical & Electronic Engineering | |
Investigation of Dual Plasmonic Material Integrated Wrench-Shaped PCF Sensor with Broadband Resonance for Cancer Cell & Chemical Detection | Journal Article | Optik (Elsevier) | 2024 | Mr. Md. Faysal Nayan | Department of Electrical & Electronic Engineering | Paper Link |
A high-performance biosensor based on one-dimensional photonic crystal for the detection of cancer cells | Journal Article | Optical and Quantum Electronics ( Springer Nature) | 2024 | Mr. Md. Faysal Nayan | Department of Electrical & Electronic Engineering | Paper Link |
Optical based surface plasmon resonance sensor for the detection of the various kind of cancerous cell | Journal Article | Cell Biochemistry and Biophysics (Springer-Nature) | 2024 | Mr. Md. Faysal Nayan | Department of Electrical & Electronic Engineering | Paper Link |
Design and Development of High Sensitive Surface Plasmon Resonance Biosensors for Glucose Detection | Journal Article | Plasmonics (Springer) | 2024 | Mr. Md. Faysal Nayan | Department of Electrical & Electronic Engineering | Paper Link |
Performance Analysis of Graphene Field Effect Transistor at Nanoscale Regime | Journal Article | Advances in Electrical Engineering, Electronics and Energy (Elsevier e-prime) | 2024 | Mr. Md. Faysal Nayan | Department of Electrical & Electronic Engineering | Paper Link |
Photonic Crystal Fiber-based SPR Biosensor Coated with Ag-TiO2 and Au-TiO2 for the Detection of Skin Cancer: A Comparison | Journal Article | Optical and Quantum Electronics | 2024 | Mr. Md. Faysal Nayan | Department of Electrical & Electronic Engineering | Paper Link |
Performance Analysis of Thickness Dependency of Control Coefficients of CNTFET | Conference Proceedings | 6th International Conference on Electrical Engineering and Information & Communication Technology (ICEEICT) (IEEE) | 2024 | Mr. Md. Faysal Nayan | Department of Electrical & Electronic Engineering | Paper Link |
Quantum insights into dielectric materials and oxide thickness dependent conductance in single walled CNTFET: A parametric simulation study | Conference Proceedings | International Conference on Advances in Computing, Communication, Electrical and Smart Systems (iCACCESS 2024), IEEE | 2024 | Mr. Md. Faysal Nayan | Department of Electrical & Electronic Engineering | |
Numerical Analysis of Diameter Dependency of Control Coefficient of Carbon Nanotube Field Effect Transistor (CNTFET) | Journal Article | Majlesi Journal of Electrical Engineering | 2024 | Mr. Md. Faysal Nayan | Department of Electrical & Electronic Engineering | |
Highly Sensitive ZnO/Ag/BaTiO₃/MoS₂ hybrid structure-based surface plasmon biosensor for the detection of mycobacterium tuberculosis bacteria | Journal Article | Optics Continuum (Optica) | 2024 | Mr. Md. Faysal Nayan | Department of Electrical & Electronic Engineering | Paper Link |
Performance analysis of Ag-TiO2 coated hexagonal shaped photonic crystal fiber plasmonic sensor and ethanol’s low water content detection | Journal Article | Plasmonics (Springer) | 2024 | Mr. Md. Faysal Nayan | Department of Electrical & Electronic Engineering | Paper Link |
1D Photonic Crystal Structures with Graphene based Hyperbolic Metamaterials | Others | Photonic Devices and Applications | 2024 | Mr. Md. Faysal Nayan | Department of Electrical & Electronic Engineering | |
Design and Development of an Alerting Device for Pacemaker Patients to Mitigate Risks from High Magnetic Fields | Conference Proceedings | 6th International Conference on Electrical Information and Communication Technology (EICT) , IEEE | 2024 | Mr. Md. Faysal Nayan | Department of Electrical & Electronic Engineering | Paper Link |
Performance Evaluation and Comparative Analysis of Logic Gates based on CNTFET and CMOS | Conference Proceedings | 26th International Conference on Computer and Information Technology (ICCIT), IEEE | 2024 | Mr. Md. Faysal Nayan | Department of Electrical & Electronic Engineering | Paper Link |
Characterizing CNTFET Logic Gate and Adder Performance Trade-offs by considering CNT Tube Diameter and Dielectric Constant | Conference Proceedings | 9th International WIE Conference on Electrical and Computer Engineering (WIECON-ECE), IEEE | 2024 | Mr. Md. Faysal Nayan | Department of Electrical & Electronic Engineering | Paper Link |
Design and performance analysis of gold-coated photonic crystal fiber plasmonic biosensor | Conference Proceedings | 9th International WIE Conference on Electrical and Computer Engineering (WIECON-ECE), IEEE | 2024 | Mr. Md. Faysal Nayan | Department of Electrical & Electronic Engineering | Paper Link |
Extraction and characterization of biodiesel from waste cooking oil: An investigative approach based on the number of times used | Journal Article | Energy and Thermofluids Engineering | 2024 | Mr. Mohammad Joynal Abedin | Department of Mechanical and Production Engineering | Paper Link |
Advances in the performance of engineered cementitious composites under extreme conditions | Book | 2024 | Mr. Mohammad Joynal Abedin | Department of Mechanical and Production Engineering | Paper Link | |
Recent developments in functional plant fiber-based composites and their engineering applications | Book | 2024 | Mr. Mohammad Joynal Abedin | Department of Mechanical and Production Engineering | Paper Link | |
Additive manufacturing-based composites for sensors and other applications | Book | 2024 | Mr. Mohammad Joynal Abedin | Department of Mechanical and Production Engineering | Paper Link | |
Artificial Intelligence for Detection of Lung Cancer using Transfer Learning and Morphological Features | Journal Article | Journal of Supercomputing, SpringerNature | 2024 | Dr. Umma Hany | Department of Electrical & Electronic Engineering | |
Md. Ashifur Rahman, Dr. Md. Fokhrul Islam and Imran Rahman, "Technical and economic evaluation of a grid connected hybrid system in Gazipur, Bangladesh" | Conference Proceedings | 7th International Conference on Developments in Renewable Energy Technology (ICDRET) | 2024 | Mr. Md. Ashifur Rahman | Department of Electrical & Electronic Engineering | |
Electrical energy and the environment: Prospects and upcoming challenges of the World's top leading countries | Journal Article | Renewable and Sustainable Energy Reviews | 2024 | Prof. Dr. Omar Farrok | Department of Electrical & Electronic Engineering | Paper Link |
A critical analysis of wind energy generation potential in different regions of Bangladesh | Journal Article | Energy Reports | 2024 | Prof. Dr. Omar Farrok | Department of Electrical & Electronic Engineering | Paper Link |
Rahman, A., Parvin, N., Rashid, M. H., Roy, J., Sakil, M. A., Ferdoushg, F., ... & Kader, M. A. (2024). Edible chitosan in preserving the quality and shelf life of fresh-cut mango (Mangifera indica L.). | Journal Article | Czech Journal of Food Sciences | 2024 | Dr. Mohammad Abdul Kader | Department of Arts and Sciences | |
Kader, M. A., Shahruzzaman, M., Parvin, N., Shams, K., Kamruzzaman, M., Haque, P., & Khan, M. A. (2024). Development of biocompatible packaging material: starch/PVA-based bio-composite enhanced with hydroxypropyl methylcellulose. Polymer-Plastics Tec | Journal Article | Polymer-Plastics Technology and Materials | 2024 | Dr. Mohammad Abdul Kader | Department of Arts and Sciences | Paper Link |
Tabassum, M., Shahruzzaman, M., Mukta, N. A., Biswas, S., Khan, M. N., Kader, M. A., & Haque, P. (2024). Hydroxyapatite and cellulose nanocrystals loaded gelatin-chitosan based electrospun nanofibrous mats for rapid wound healing. Heliyon, 10(4). | Journal Article | Heliyon | 2024 | Dr. Mohammad Abdul Kader | Department of Arts and Sciences | |
Triboelectric Nanogenerators for Self-Powered Degradation of Chemical Pollutants | Journal Article | ACS OMEGA | 2024 | Mr. Abdullah Sayam | Department of Textile Engineering | Paper Link |
Carbon-Based Textile-Structured Triboelectric Nanogenerators for Smart Wearables | Journal Article | Advanced Energy & Sustainability Research | 2024 | Mr. Abdullah Sayam | Department of Textile Engineering | Paper Link |
A Blockchain-Based Solution for Securing Central Bank Bond Management | Conference Proceedings | 2024 IEEE International Conference on Computing, Applications and Systems (COMPAS) | 2024 | Mr. Saha Reno | Department of Computer Science and Engineering | Paper Link |
Integrating Blockchain and Machine Learning for Enhanced Anti-Money Laundering System | Journal Article | International Journal of Information Technology | 2024 | Mr. Saha Reno | Department of Computer Science and Engineering | Paper Link |
Enhancing foreign exchange reserve security for central banks using Blockchain, FHE, and AWS | Journal Article | Journal of King Saud University - Computer and Information Sciences | 2024 | Mr. Saha Reno | Department of Computer Science and Engineering | Paper Link |
Breaking the Blockchain Trilemma: A Comprehensive Consensus Mechanism for Ensuring Security, Scalability, and Decentralization | Journal Article | IET Software | 2024 | Mr. Saha Reno | Department of Computer Science and Engineering | Paper Link |
Utilizing Ethereum-Based Lending System to Prevent Defaulting on Loans | Conference Proceedings | 2022 4th International Conference on Data, Engineering and Applications (IDEA) | 2024 | Mr. Saha Reno | Department of Computer Science and Engineering | Paper Link |
A Blockchain and Machine Learning-Based Integrated Framework for Dynamic Customs Security Enhancement with a Focus on Smuggling | Conference Proceedings | 2024 6th International Conference on Electrical Engineering and Information & Communication Technology (ICEEICT) | 2024 | Mr. Saha Reno | Department of Computer Science and Engineering | Paper Link |
Balancing Security, Scalability and Decentralization of Blockchain using SHBF-Based Consensus | Conference Proceedings | 2024 6th International Conference on Electrical Engineering and Information & Communication Technology (ICEEICT) | 2024 | Mr. Saha Reno | Department of Computer Science and Engineering | Paper Link |
SHBF: A Secure and Scalable Hybrid Blockchain Framework for Resolving Trilemma Challenges | Journal Article | International Journal of Information Technology | 2024 | Mr. Saha Reno | Department of Computer Science and Engineering | Paper Link |
Exploring Weka and Python for Educational Data Mining: Naïve Bayes vs. J48 | Conference Proceedings | 2024 5th International Conference on Mobile Computing and Sustainable Informatics (ICMCSI) | 2024 | Mr. Saha Reno | Department of Computer Science and Engineering | Paper Link |
DPoS-Based Blockchain Payments for Electrified Roads: Ensuring Security, Efficiency and Transparency | Conference Proceedings | 2023 2nd International Conference on Big Data, IoT and Machine Learning (BIM) | 2024 | Mr. Saha Reno | Department of Computer Science and Engineering | Paper Link |
An Off-Chain-Based Blockchain with Improved Decentralization | Conference Proceedings | 2023 26th International Conference on Computer and Information Technology (ICCIT) | 2024 | Mr. Saha Reno | Department of Computer Science and Engineering | Paper Link |
TrilemmaGuard: Safeguarding against the Challenges Posed by Blockchain Trilemma | Conference Proceedings | 2023 26th International Conference on Computer and Information Technology (ICCIT) | 2024 | Mr. Saha Reno | Department of Computer Science and Engineering | Paper Link |
A Novel Approach to Optimizing Transaction Processing Rate and Space Requirement of Blockchain via Off-Chain Architecture | Journal Article | International Journal of Information Technology | 2024 | Mr. Saha Reno | Department of Computer Science and Engineering | Paper Link |
A Lightweight Deep Learning Architecture for Efficient Multimodal Medical Image Segmentation Using Attention Mechanism | Conference Proceedings | 3rd International Conference on Computing Advancements (ICCA) 2024 | 2024 | Ms. Subah Nawar | Department of Computer Science and Engineering | |
Toward the Realization of an Intelligent Reflecting Surface With Full 360° Phase Variation for Beam Steering Applications at C and X Bands | Journal Article | IEEE Access | 2024 | Prof. Dr. A K M Baki | Department of Electrical & Electronic Engineering | |
Comparison of Rank and Condition Number of an Urban Micro (UMi) Channel at 2.4 and 5.8 GHz | Conference Proceedings | 26th International Conference on Computer and Information Technology (ICCIT) | 2024 | Prof. Dr. A K M Baki | Department of Electrical & Electronic Engineering | Paper Link |
M. M. A. Rahman and M. M. A. Rahman, "A Single RBF Neural Network Approach to MPPT Algorithm for PV Systems," 2024 IEEE International Conference on Electro Information Technology (eIT), Eau Claire, WI, USA, 2024, pp. 328-332, doi: 10.1109/eIT60633.20 | Conference Proceedings | 2024 IEEE International Conference on Electro Information Technology (eIT), Eau Claire, WI, USA | 2024 | Mr. M. M. Atiqur Rahman | Department of Electrical & Electronic Engineering | Paper Link |
A novel theta-shaped slotted patch antenna with a unique DGS for Sub-6 GHz 5G communication | Journal Article | Results in Engineering | 2024 | Mr. Md. Aminur Rahman | Department of Electrical & Electronic Engineering | Paper Link |
Simulation and survey-based feasibility study of concentrated solar plant in northern and central Bangladesh | Journal Article | Results in Engineering | 2024 | Mr. Md. Aminur Rahman | Department of Electrical & Electronic Engineering | Paper Link |
A study of micro-silica as a substitution of cement for sustainable concrete | Journal Article | International e Journal Of Engineering Research And Development | 2024 | Dr. Sharmin Reza Chowdhury | Department of Civil Engineering | |
Study on carbonation of low strength concrete made of brick aggregate | Journal Article | Case Studies in Construction Materials | 2024 | Dr. Sharmin Reza Chowdhury | Department of Civil Engineering | Paper Link |
PERFORMANCE EVALUATION OF PREDICTION MODEL FOR FERROCEMENT JACKETED RC COLUMN | Conference Proceedings | 7th International Conference on Civil Engineering for Sustainable Development (ICCESD 2024), Bangladesh | 2024 | Dr. Sharmin Reza Chowdhury | Department of Civil Engineering | |
Structural behavior of CFRP wrapped circular hollow bridge piers under cyclic loading considering local buckling limit state | Journal Article | Asian Journal of Civil Engineering | 2024 | Dr. Sharmin Reza Chowdhury | Department of Civil Engineering | |
SEISMIC BEHAVIOR OF MULTI-STORIED RC BUILDING WITHRE-ENTRANT CORNER | Journal Article | Jurnal Teknology Science and Engineering | 2024 | Dr. Sharmin Reza Chowdhury | Department of Civil Engineering | Paper Link |
Non-simultaneous impact of droplet pairs on solid surfaces | Journal Article | Physics of Fluids | 2024 | Dr. Anjan Goswami | Department of Mechanical and Production Engineering | Paper Link |
Uddessho: An Extensive Benchmark Dataset for Multimodal Author Intent Classification in Low-Resource Bangla Language | Book | SpringerLink Book Chapter from the 18th International Conference on Information Technology and Applications (ICITA 2024) | 2024 | Mr. Md. Moinul Hoque | Department of Computer Science and Engineering | |
Bengali Hateful Memes Detection: A Comprehensive Dataset and Deep Learning Approach | Conference Proceedings | International Conference on Advances in Computing, Communication, Electrical, and Smart Systems (iCACCESS), 8-9 March, Dhaka, Bangladesh, IEEExplore indexed | 2024 | Mr. Md. Moinul Hoque | Department of Computer Science and Engineering | |
Video-based Driver Distraction Detection using Transfer Learning: Bangladesh Perspective | Conference Proceedings | International Conference on Advances in Computing, Communication, Electrical, and Smart Systems (iCACCESS), 8-9 March, Dhaka, Bangladesh, IEEExplore indexed | 2024 | Mr. Md. Moinul Hoque | Department of Computer Science and Engineering | |
Advancing Abstractive Bangla Text Summarization: A Deep Learning Approach Using Seq2seq Encoder-Decoder Model and T5 Transformer | Conference Proceedings | 5th International Conference on Sustainable Technologies for Industry 5.0, IEEExplore indexed | 2024 | Mr. Md. Moinul Hoque | Department of Computer Science and Engineering | Paper Link |
Influence of openings and strengthening methods on shear Strength of RC wall specimens | Conference Proceedings | 18th World Conference on Earthquake Engineering, 18WCEE, Milan, Italy, 30 June - 5 July | 2024 | Ms. Zasiah Tafheem | Department of Civil Engineering | Paper Link |
Effect of natural thickener on printing performance over cotton woven fabric, | Journal Article | Heliyon | 2024 | Ms. Shaima Islam | Department of Textile Engineering | |
Effect of cotton-polyester composite yarn on the physico-mechanical and comfort properties of woven fabric, | Journal Article | SPE Polymers | 2024 | Ms. Shaima Islam | Department of Textile Engineering | |
Life and death of a thin liquid film | Journal Article | Communications Physics, Nature | 2024 | Dr. Muhammad Rizwanur Rahman | Department of Mechanical and Production Engineering | Paper Link |
On the hydrostatic limit for thin film flow with applications to thermosyphons | Journal Article | Applied Thermal Engineering | 2024 | Dr. Muhammad Rizwanur Rahman | Department of Mechanical and Production Engineering | |
ASSESSING BOARDING/ALIGHTING FACILITY QUALITY & ACCESSIBILITY TO METRO SERVICE USING MACHINE LEARNING APPROACH | Conference Proceedings | 7th International Conference on Advances in Civil Engineering ( ICACE,2024),12-14 December 2024, CUET, Chattogram. | 2024 | Ms. Faria Afrin Prova | Department of Civil Engineering | |
Antibiotic resistance of bioaerosols in particulate matter from indoor environments of the hospitals in Dhaka Bangladesh | Journal Article | Scientific Reports | 2024 | Mr. Badhon Ali Khan | Department of Arts and Sciences | Paper Link |
Bengali Music Genre Classification Using WaveNet | Conference Proceedings | 2023 26th International Conference on Computer and Information Technology (ICCIT) | 2023 | Mr. Faisal Muhammad Shah | Department of Computer Science and Engineering | Paper Link |
Bengali Cyberbullying Text Detection: A Comprehensive Study | Conference Proceedings | 2023 26th International Conference on Computer and Information Technology (ICCIT) | 2023 | Mr. Faisal Muhammad Shah | Department of Computer Science and Engineering | Paper Link |
Explainable Multimodal Sentiment Analysis on Bengali Memes | Conference Proceedings | 2023 26th International Conference on Computer and Information Technology (ICCIT) | 2023 | Mr. Faisal Muhammad Shah | Department of Computer Science and Engineering | Paper Link |
Bengali Image Captioning Using Vision Encoder-Decoder Model | Conference Proceedings | 2023 26th International Conference on Computer and Information Technology (ICCIT) | 2023 | Mr. Faisal Muhammad Shah | Department of Computer Science and Engineering | Paper Link |
Machine Learning Approaches and Analysis for Bangla Music Genre Classification | Conference Proceedings | 2023 5th International Conference on Sustainable Technologies for Industry 5.0 (STI) | 2023 | Mr. Faisal Muhammad Shah | Department of Computer Science and Engineering | Paper Link |
Bengali Fake Review Detection using Semi-supervised Generative Adversarial Networks | Conference Proceedings | 5th International Conference on Natural Language Processing (ICNLP) | 2023 | Mr. Faisal Muhammad Shah | Department of Computer Science and Engineering | Paper Link |
An Ensemble approach of Pre-trained CNN models for Recognition of Handwritten Characters in Bangla | Conference Proceedings | 3rd International Conference on Emerging Smart Technologies and Applications 2023 (eSmarTA2023) | 2023 | Mr. Tanvir Ahmed | Department of Computer Science and Engineering | |
A Comparative Study of Undersampling and Oversampling Methods for Flood Forecasting in Bangladesh using Machine Learning | Conference Proceedings | 14th International Conference on Computing, Communication and Networking Technologies (ICCCNT) | 2023 | Mr. Tanvir Ahmed | Department of Computer Science and Engineering | |
Performance Analysis of the Physical Layer of Long-Term Evolution (LTE) | Journal Article | Australian Journal of Engineering and Innovative Technology | 2023 | Mr. Tanvir Ahmed | Department of Computer Science and Engineering | Paper Link |
Efficient Feature Selection On Adversarial Botnet Detection | Journal Article | 2023 | Ms. Raqeebir Rab | Department of Computer Science and Engineering | ||
A novel FRTS/FCTS-based MAC Protocol for In-band Full-duplex Wireless Ad-hoc Networks | Others | 2023 | Ms. Raqeebir Rab | Department of Computer Science and Engineering | ||
Personality Prediction Based on Contextual Feature Embedding SBERT | Others | 2023 | Ms. Raqeebir Rab | Department of Computer Science and Engineering | ||
Interpretable Multi Labeled Bengali Toxic Comments Classification using Deep Learning | Conference Proceedings | International Conference on Electrical, Computer and Communication Engineering (ECCE) | 2023 | Mr. Tanveer Ahmed Belal | Department of Computer Science and Engineering | Paper Link |
Study on Radiation Impact of 4G Mobile Communication System on Human Body by EEG in Dhaka | Conference Proceedings | 2023 International Conference on Communications, Computing and Artificial Intelligence (CCCAI) | 2023 | Prof. Dr. A.K.M. Ehtesanul Islam | Department of Electrical & Electronic Engineering | Paper Link |
Study on the Effect of Double Inset Fed for Microstrip Patch Antenna for 5G Application | Conference Proceedings | 2023 International Conference on Computational Intelligence, Communication Technology and Networking (CICTN) | 2023 | Prof. Dr. A.K.M. Ehtesanul Islam | Department of Electrical & Electronic Engineering | Paper Link |
A Shuffling Building Block and Augmentation Parameter Tuning Techniques to Handle Small Medical Dataset | Conference Proceedings | 2023 International Conference on Electrical, Computer and Communication Engineering (ECCE) | 2023 | Prof. Dr. A.K.M. Ehtesanul Islam | Department of Electrical & Electronic Engineering | Paper Link |
Analysis of Post Fault Oscillation Damping by VSC-HVDC in an Offshore Wind Farm Connected System | Conference Proceedings | 2023 5th International Conference on Sustainable Technologies for Industry 5.0 (STI) | 2023 | Prof. Dr. Tareq Aziz | Department of Electrical & Electronic Engineering | |
Design and Analysis of 21 level Symmetric Multilevel Inverter for Direct Grid Integration of Solar Photovoltaic systems | Conference Proceedings | 2023 10th IEEE International Conference on Power Systems (ICPS) | 2023 | Prof. Dr. Tareq Aziz | Department of Electrical & Electronic Engineering | |
A Smart Charging Strategy for Electric Vehicles with a Priority for Emergency Vehicles | Conference Proceedings | IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET) | 2023 | Prof. Dr. Tareq Aziz | Department of Electrical & Electronic Engineering | |
A Methodology for Implementing Demand Side Management in a Community Having Both Residential and Commercial Customers | Conference Proceedings | 3rd International Conference on Robotics, Electrical and Signal Processing Techniques (ICREST) | 2023 | Prof. Dr. Tareq Aziz | Department of Electrical & Electronic Engineering | Paper Link |
Optimal selection of single tuned passive filters to enhance post-fault voltage recovery and power quality in a renewable integrated microgrid | Journal Article | IET Renewable Power Generation | 2023 | Prof. Dr. Tareq Aziz | Department of Electrical & Electronic Engineering | Paper Link |
Additive linear modelling and genetic algorithm based electric vehicle outlook and policy formulation for decarbonizing the future transport sector of Bangladesh | Journal Article | Transport Policy | 2023 | Prof. Dr. Tareq Aziz | Department of Electrical & Electronic Engineering | Paper Link |
Heart Valve Defect Detection From PCG Signals Using Spectral And Fractal Features | Conference Proceedings | ICCIT | 2023 | Dr. Monjur Morshed | Department of Electrical & Electronic Engineering | |
Analysis and Comparison of the DNA Sequence of an Unknown Respiratory Virus with Influenza and Corona Using Biopython | Conference Proceedings | ICOTL | 2023 | Dr. Monjur Morshed | Department of Electrical & Electronic Engineering | |
SAR-CardioNet: A Network for Heart Valve Disease Detection From PCG Signal Based on Split-Self Attention With Residual Paths | Journal Article | IEEE Sensors Journal | 2023 | Dr. Monjur Morshed | Department of Electrical & Electronic Engineering | |
A Deep Neural Network for Heart Valve Defect Classification From Synchronously Recorded ECG and PCG | Journal Article | IEEE Sensors Letters | 2023 | Dr. Monjur Morshed | Department of Electrical & Electronic Engineering | |
Analysis of conductivity and band-gap energy of bismuth ferrite nanoparticles as prospective photovoltaic material | Journal Article | Materials Today: Proceedings (Elsevier) | 2023 | Prof. Dr. Md. Meganur Rhaman | Department of Electrical & Electronic Engineering | Paper Link |
Effect of Input Channel Reduction on EEG Seizure Detection | Journal Article | Przeglad Elektrotechniczny | 2023 | Mr. Muhammad Jakaria Rahimi | Department of Electrical & Electronic Engineering | Paper Link |
Robust Classifier Selection for Cost-Effective EEG Seizure Detection in Remote Areas | Conference Proceedings | 2023 International Conference on Information and Communication Technology for Sustainable Development (ICICT4SD) | 2023 | Mr. Muhammad Jakaria Rahimi | Department of Electrical & Electronic Engineering | |
Comparison of Different Models in Detection of Epilepsy | Journal Article | Journal of Signal Processing | 2023 | Mr. Muhammad Jakaria Rahimi | Department of Electrical & Electronic Engineering | |
A Study on the SNR and SINR Performance of a LiFi Transmission System: From the Perspective of a Smart Classroom in Bangladesh | Conference Proceedings | 2023 3rd Asian Conference on Innovation in Technology (ASIANCON) | 2023 | Prof. Dr. Md. Shariful Islam | Department of Electrical & Electronic Engineering | |
User orientation and position-based transmission characteristics analysis of a LiFi system | Journal Article | Journal of Optical Communication, De Gruyter | 2023 | Prof. Dr. Md. Shariful Islam | Department of Electrical & Electronic Engineering | Paper Link |
Design of Surface Plasmon Resonance Based Enhanced Sensitive Biosensor For Multiple Cancer Cell Detection | Conference Proceedings | Frontiers in Optics + Laser Science 2023 (FiO, LS) | 2023 | Mr. Khandakar Md. Ishtiak | Department of Electrical & Electronic Engineering | Paper Link |
Graphene-Based Surface Plasmon Resonance Sensor for Water Salinity Concentration Detection Using Multiple Light Source Techniques | Journal Article | IEEE Access | 2023 | Mr. Khandakar Md. Ishtiak | Department of Electrical & Electronic Engineering | Paper Link |
Low Leakage CMOS Design Technique with Stable State Retention | Journal Article | IETE Journal of Research | 2023 | Mr. Khandakar Md. Ishtiak | Department of Electrical & Electronic Engineering | Paper Link |
Modelling a Near Perfect Temperature Tunable Multiband VO2 Based Photonic-Plasmonic Absorber Within Visible and Near Infrared Spectra | Journal Article | Results in Engineering | 2023 | Mr. Khandakar Md. Ishtiak | Department of Electrical & Electronic Engineering | Paper Link |
Three-Port Converters for Energy Conversion of PV-BES Integrated Systems—A Review | Journal Article | IEEE Access | 2023 | Mr. Md. Ariful Islam | Department of Electrical & Electronic Engineering | |
The Revitalization of Farashgonj as a Cultural and Heritage Town | Journal Article | International Journal of Innovative Science and Research Technology | 2023 | Dr. Maher Niger | Department of Architecture | Paper Link |
Assessing the Impact of Spacer Size Variations on the Ring-Spun Yarn Quality Ranking | Journal Article | Textile & Leather Review | 2023 | Mr. Subrata Kumar Saha | Department of Textile Engineering | Paper Link |
Influence of Blending Method and Blending Ratio on Ring-spun Yarn Quality – a MANOVA Approach | Journal Article | Tekstilec | 2023 | Mr. Subrata Kumar Saha | Department of Textile Engineering | Paper Link |
Incandescent annealing purification of carbon nanotube films with high efficiency and non-destructiveness | Journal Article | Surfaces and Interfaces | 2023 | Dr. Farial Islam Farha | Department of Textile Engineering | |
Creep Response of Untreated and Additive Treated Jute Geotextiles in Isothermal Condition | Journal Article | Geotechnical and Geological Engineering | 2023 | Mr. Shafiqul Islam | Department of Civil Engineering | Paper Link |
Improvement of Shear Strength Properties of Organic Soil Using Sand Column | Conference Proceedings | International Conference on Planning, Architecture and Civil Engineering | 2023 | Mr. A S M Fahad Hossain | Department of Civil Engineering | Paper Link |
Effects of Shear Wave Velocity and Thickness of Soil Layers on 1D Dynamic Response in the Saguenay Region, Quebec | Conference Proceedings | Rocscience International Conference 2023 (RIC2023) | 2023 | Mr. A S M Fahad Hossain | Department of Civil Engineering | Paper Link |
Capital Structure and Profitability: Evidence from China | Journal Article | 2023 | Dr. Naznin Sultana Chaity | School of Business | Paper Link | |
The effects of abusive supervision on the behaviors of employees in an organization | Journal Article | Social Sciences & Humanities Open | 2023 | Dr. Naznin Sultana Chaity | School of Business | Paper Link |
CEO age and working capital management: evidence from China | Journal Article | International Journal of Corporate Governance | 2023 | Dr. Naznin Sultana Chaity | School of Business | Paper Link |
Machine Learning-Driven Gamification: Boosting User Engagement in Business | Journal Article | Global Disclosure of Economics and Business | 2023 | Mr. Kazi Ahmed Farhan | School of Business | Paper Link |
AI-Enhanced IMC: Leveraging Data Analytics for Targeted Marketing Campaigns | Journal Article | Asian Business Review | 2023 | Mr. Kazi Ahmed Farhan | School of Business | Paper Link |
Factors Affecting Customers’ Intention towards Online Purchase: An Empirical Study on Bangladesh | Journal Article | The Retail and Marketing Review indexed by Web of Science (Emerging Sources Citation Index) | 2023 | Mr. Md. Hafez | School of Business | Paper Link |
Orthonormal Bernstein Galerkin Technique for Computations of Higher Order Eigenvalue Problems | Journal Article | MethodsX | 2023 | Dr. Humaira Farzana | Department of Arts and Sciences | Paper Link |
SENSITIVITY ANALYSIS AND IMPACT OF AN IMPERFECT VACCINE OF TWO STRAINS OF HEPATITIS B VIRUS INFECTION | Journal Article | Journal of Biological Systems | 2023 | Dr. Jannatun Nayeem | Department of Arts and Sciences | Paper Link |
Rethinking the Acculturation Model: Implications for Theory and Research | Journal Article | BELTA Journal | 2023 | Mr. Mohammad Rukanuddin | Department of Arts and Sciences | Paper Link |
Recognizing Stakeholders and Factors Mediating Washback in Language Testing | Journal Article | Education Research International | 2023 | Mr. Mohammad Rukanuddin | Department of Arts and Sciences | Paper Link |
Finite element simulation on MHD Free Convection in a Square Enclosure with Elliptical Shaped Obstacle | Journal Article | GANIT: Journal of Bangladesh Mathematical Society | 2023 | Dr. Muhammad Sajjad Hossain | Department of Arts and Sciences | Paper Link |
Simulation of Nanofluid Flow in Porous Square-Shaped Enclosures | Journal Article | Journal of Scientific Research | 2023 | Dr. Muhammad Sajjad Hossain | Department of Arts and Sciences | Paper Link |
Finite element simulation on MHD Free Convection in a Square Enclosure With Elliptical Shaped Obstacle | Journal Article | GANIT J. Bangladesh Math. Soc. | 2023 | Prof. Dr. Md. Masum Billah | Department of Arts and Sciences | |
Rethinking the Acculturation Model: Implications for Theory and Research | Journal Article | BELTA Journal | 2023 | Mr. Kazi Dawood Hafiz | Department of Arts and Sciences | Paper Link |
Textbook and teaching materials evaluation: A Top-down understanding | Journal Article | Bangladesh Maritime Journal | 2023 | Mr. Kazi Dawood Hafiz | Department of Arts and Sciences | Paper Link |
Increase in conduction velocity in myelinated nerves due to stretch – An experimental verification | Journal Article | Frontiers in Neuroscience | 2023 | Ms. Sabrina Sharmin | Department of Arts and Sciences | |
Reduction of Total Drag for Finite Cylinders in Turbulent Flow with a Half-C Shape Upstream Body | Journal Article | International Journal of Fluid Mechanics Research | 2023 | Mr. Md. Arif Mahmud Shuklo Shoshe | Department of Mechanical and Production Engineering | Paper Link |
Recycling of Plastic Polymer: Reinforcement of Building Material Using Polymer Plastics of Used COVID-19 Syringes | Journal Article | Advances in Sustainable Building Materials and Construction | 2023 | Prof. Dr. Mohammad Sarwar Morshed | Department of Mechanical and Production Engineering | |
Solar thermal adsorption cooling system in Bangladesh: INSEL simulation and economic analysis | Conference Proceedings | 7th International Conference on Mechanical Engineering and Renewable Energy (ICMERE) | 2023 | Dr. Mahbubul Muttakin | Department of Mechanical and Production Engineering | |
IBFND: An Improved Dataset for Bangla Fake News Detection and Comparative Analysis of Performance of Baseline Models | Conference Proceedings | 2023 International Conference on Next-Generation Computing, IoT and Machine Learning (NCIM) | 2023 | Mr. Md. Aminur Rahman | Department of Computer Science and Engineering | Paper Link |
A Comparative Study of Detecting Violation of Face Mask and Social Distancing using Different Deep Learning Models | Conference Proceedings | 2023 7th International Conference on Intelligent Computing and Control Systems (ICICCS) | 2023 | Mr. Shoeb Mohammad Shahriar | Department of Computer Science and Engineering | Paper Link |
Analysis of Post Fault Oscillation Damping by VSC-HVDC in an Offshore Wind Farm Connected System | Conference Proceedings | 2023 5th International Conference on Sustainable Technologies for Industry 5.0 (STI) | 2023 | Mr. Ata-E-Rabbi | Department of Electrical & Electronic Engineering | Paper Link |
Refugee Architecture for Childhood Crisis: Concept, Politics, and Transformation of CFS in Balukhali Camp, Cox’s Bazar, Bangladesh | Others | 20TH ASIAN CONGRESS OF ARCHITECTS (ACA 20), PAGHAHABI: WEAVING A FUTURE-READY ENVIRONMENT | 2023 | Mr. S. M. Arafat Hossain | Department of Architecture | |
Impact of Cerebral Aneurysm Wall Growth on Hemodynamic Parameters in Idealized Bifurcated Cerebral Arteries | Conference Proceedings | 14th International Conference on Mechanical Engineering (ICME2023) | 2023 | Dr. Kazi Ekramul Hoque | Department of Arts and Sciences | |
Finite element simulation on MHD Free Convection in a Square Enclosure with Elliptical Shaped Obstacle | Journal Article | GANITJ. | 2023 | Dr. Kazi Ekramul Hoque | Department of Arts and Sciences | Paper Link |
Turning SKD 11 Hardened Steel: An Experimental Study of Surface Roughness and Material Removal Rate Using Taguchi Method | Journal Article | Advances in Materials Science and Engineering | 2023 | Mr. Rezaul Karim Nayeem | Department of Mechanical and Production Engineering | Paper Link |
Assessing the barriers to lean manufacturing adoption in the furniture industry of Bangladesh: a fuzzy-DEMATEL study | Journal Article | International Journal of Industrial Engineering and Operations Management | 2023 | Mr. Rezaul Karim Nayeem | Department of Mechanical and Production Engineering | Paper Link |
An Experimental Investigation for Multi-objective Optimization of Turning Parameters on Graphene/Al2O3 Reinforced Polymer Hybrid Nanocomposite using RSM Combined with GRA | Conference Proceedings | 14th International Conference on Mechanical Engineering December 18-19, 2023 | 2023 | Mr. Shah Md. Ashiquzzaman Nipu | Department of Mechanical and Production Engineering | |
Turning SKD 11 Hardened Steel: An Experimental Study of Surface Roughness and Material Removal Rate Using Taguchi Method | Journal Article | Advances in Materials Science and Engineering | 2023 | Mr. Shah Md. Ashiquzzaman Nipu | Department of Mechanical and Production Engineering | |
A decision support system for classifying supplier selection criteria using machine learning and random forest approach | Journal Article | Decision Analytics Journal | 2023 | Mr. Shah Md. Ashiquzzaman Nipu | Department of Mechanical and Production Engineering | |
EXPERIMENTAL INVESTIGATION ON THE PERFORMANCES OF DIFFERENT PAD MATERIALS USED IN A SUSTAINABLE ECO-FRIENDLY REFRIGERATOR | Journal Article | Journal of Mechanical Engineering | 2023 | Dr. Md. Kharshiduzzaman | Department of Mechanical and Production Engineering | Paper Link |
EVALUATION OF MECHANICAL PROPERTIES OF KENAF-WOVEN KEVLAR & JUTE-WOVEN KEVLAR REINFORCED HYBRID COMPOSITES WITH DIFFERENT WEIGHT FRACTIONS AND PLY SEQUENCES | Conference Proceedings | 7th International Conference on Mechanical Engineering and Renewable Energy 2023 (ICMERE2023) | 2023 | Dr. Md. Kharshiduzzaman | Department of Mechanical and Production Engineering | Paper Link |
Unveiling the microstructure of LES manufactured parts for sustainable productive business | Journal Article | Journal of Alloys and Metallurgical Systems | 2023 | Dr. Md. Kharshiduzzaman | Department of Mechanical and Production Engineering | Paper Link |
Measurement and Controlling Friction Force in a Sliding Microwire by Size and Boundary Condition Variation | Conference Proceedings | International Conference on Mechanical Engineering (ICME 2023), BUET, Paper ID 311 | 2023 | Dr. Fazlar Rahman | Department of Mechanical and Production Engineering | |
Experimental and Numerical Study of Conical Shaped Pin Finned Heat Sink with PCM Material | Conference Proceedings | International Conference on Mechanical, Materials and Production Engineering (IUT-ICMMPE) 2023 | 2023 | Dr. Fazlar Rahman | Department of Mechanical and Production Engineering | |
Quantification of Electrostatic and Adhesive Forces Between Microwire and Microprobe Using Experimental and Numerical Approaches | Journal Article | Arabian Journal for Science and Engineering | 2023 | Dr. Fazlar Rahman | Department of Mechanical and Production Engineering | Paper Link |
Effect of Human Hair on Mechanical Properties of Jute and BNH Fiber Reinforced Hybrid Polyester Composites | Journal Article | Journal of Natural Fibers | 2023 | Dr. Fazlar Rahman | Department of Mechanical and Production Engineering | Paper Link |
DESIGN AND DEVELOPMENT OF A GPS-BASED HOVER QUADCOPTER USING THE STM-32 MICROCONTROLLER | Conference Proceedings | 17th Annual Paper Meet-2022, Jan 2023, IEB, Bangladesh | 2023 | Dr. Mohammad Harun-Or-Rashid | Department of Mechanical and Production Engineering | |
Design and Development of a Stair Climbing Four-Wheeled Robot | Journal Article | Journal of Mechanical Engineering, IEB, Bangladesh | 2023 | Dr. Mohammad Harun-Or-Rashid | Department of Mechanical and Production Engineering | Paper Link |
Design and Development of a Battery Powered Motor Driven Rice Transplanting Machine | Journal Article | Journal of Mechanical Engineering, IEB, Bangladesh | 2023 | Dr. Mohammad Harun-Or-Rashid | Department of Mechanical and Production Engineering | Paper Link |
A critical review on control mechanisms, supporting measures, and monitoring systems of microgrids considering large scale integration of renewable energy sources | Journal Article | Energy Reports | 2023 | Mr. Nahid-Ur-Rahman Chowdhury | Department of Electrical & Electronic Engineering | Paper Link |
Optimal selection of single tuned passive filters to enhance post-fault voltage recovery and power quality in a renewable integrated microgrid | Journal Article | IET RENEWABLE POWER GENERATION | 2023 | Mr. Mushfiqul Ahmed | Department of Electrical & Electronic Engineering | Paper Link |
Progress in recovery, recycling and reuse of polymers, biopolymers and their composites | Book | Comprehensive Materials Processing (Second Edition) | 2023 | Mr. Zahid Hasan Shuvo | Department of Mechanical and Production Engineering | Paper Link |
Composite materials from synthetic and natural sources: Fabrication techniques and applications | Book | Comprehensive Materials Processing (Second Edition) | 2023 | Mr. Zahid Hasan Shuvo | Department of Mechanical and Production Engineering | Paper Link |
Prediction & Cutting Parameter Optimization for Surface Roughness of Laser Machining of SS-304 Using Taguchi Method | Journal Article | Research and Reviews: Journal of Mechanics and Machines | 2023 | Mr. Zahid Hasan Shuvo | Department of Mechanical and Production Engineering | |
Experimental Investigation on the Effects of Different Oil-based MQL on the Surface Roughness of Aluminum 6061 Alloy | Journal Article | Research and Reviews: Journal of Mechanics and Machines | 2023 | Mr. Zahid Hasan Shuvo | Department of Mechanical and Production Engineering | |
An approach to improve the existing ribbon retting of jute fibre using concrete tank and natural catalyst | Journal Article | Heliyon | 2023 | Mr. Amit Chakrabortty | Department of Textile Engineering | Paper Link |
Optimization of Device Parameters for Back Contact Transparent Conductive Oxide Less Dye Sensitized Solar Cells Fabrication | Journal Article | Physica Status Solidi A: Applications and Materials Science | 2023 | Dr. Md Zaman Molla | Department of Arts and Sciences | Paper Link |
Numerical Investigation of a 40-Storied RCC Building By Framed, Shear Wall-Framed, and Tube-in-Tube Structural Systems | Journal Article | Journal of Recent Activities in Infrastructure Science | 2023 | Mr. Md. Munirul Islam | Department of Civil Engineering | Paper Link |
Numerical investigation on the effect of infill masonry on lateral behaviour of surrounding RC frame | Journal Article | Asian Journal of Civil Engineering | 2023 | Mr. Md. Munirul Islam | Department of Civil Engineering | Paper Link |
Design of Surface Plasmon Resonance Based Enhanced Sensitive Biosensor For Multiple Cancer Cell Detection | Conference Proceedings | Frontiers in Optics + Laser Science 2023(FIO, LS) ,USA, | 2023 | Mr. Safayat-Al-Imam | Department of Electrical & Electronic Engineering | Paper Link |
Graphene-Based Surface Plasmon Resonance Sensor for Water Salinity Concentration Detection Using Multiple Light Source Techniques | Journal Article | IEEE Access | 2023 | Mr. Safayat-Al-Imam | Department of Electrical & Electronic Engineering | Paper Link |
Black Phosphorus Based SPR Biosensor for Formaldehyde Detection | Conference Proceedings | 2023 IEEE 8th Optoelectronics Global Conference (OGC),China | 2023 | Mr. Safayat-Al-Imam | Department of Electrical & Electronic Engineering | Paper Link |
Enhanced comparative performance analysis of Double Gate (DG) MOSFET over Fully Depleted Silicon on Insulator (FD-SOI) MOSFET | Conference Proceedings | 4th International Conference on Electrical, Computer & Telecommunication Engineering (ICECTE), Bangladesh | 2023 | Mr. Safayat-Al-Imam | Department of Electrical & Electronic Engineering | Paper Link |
Modelling a near perfect temperature tunable multiband VO2 based photonic-plasmonic absorber within visible and near infrared spectra | Journal Article | Results in Engineering-Elsevier | 2023 | Mr. Safayat-Al-Imam | Department of Electrical & Electronic Engineering | Paper Link |
Design and Numerical Analysis of Thin Film Solar Cells Based on Cu₂ZnSn (SₓSe₁₋ₓ)₄ with SnO₂ TCO and ZnS Buffer | Journal Article | European Journal of Electrical Engineering and Computer Science | 2023 | Ms. Naznin Sultana | Department of Electrical & Electronic Engineering | |
IMPACT OF MODIFIED FEED MECHANISM ON SEAM QUALITY OF GARMENTS | Journal Article | Annals of the University of Oradea: Fascicle of Textiles, Leatherwork | 2023 | Mr. Mohammad Faizur Rahman | Department of Textile Engineering | Paper Link |
Design and development of canvas trousers using sustainable natural dye | Journal Article | Tekstilna industrija | 2023 | Mr. Mohammad Faizur Rahman | Department of Textile Engineering | Paper Link |
Prioritizing the quality parameters of cotton carded knit yarn by varying tensions of the bottom aprons of the ring frame | Journal Article | Textile & Leather Review | 2023 | Mr. Shahriar Raian | Department of Textile Engineering | Paper Link |
An empirical model for identifying and controlling operational and environmental risks in spinning industry in an emerging economy | Journal Article | Computers & Industrial Engineering | 2023 | Mr. Shahriar Raian | Department of Textile Engineering | Paper Link |
Assessing the Impact of Spacer Size Variations on the Ring-Spun Yarn Quality Ranking | Journal Article | Textile & Leather Review | 2023 | Mr. Shahriar Raian | Department of Textile Engineering | Paper Link |
Assessment of Hydro-morphological Regime of Selected Reach of the River Jamuna | Conference Proceedings | ICWFM | 2023 | Prof. Dr. Md. Abdul Matin | Department of Civil Engineering | |
Soft-Touch or Hard-Touch: Quantifying Touches through A New System Focusing on A Pool Touchpad for Measuring Timing of Swimmers | Conference Proceedings | 10th NSysS 2023: 10th International Conference on Networking, Systems and Security | 2023 | Mr. Md. Adnan Quaium | Department of Electrical & Electronic Engineering | Paper Link |
Towards associating negative experiences and recommendations reported by Hajj pilgrims in a mass-scale survey | Journal Article | Heliyon | 2023 | Mr. Md. Adnan Quaium | Department of Electrical & Electronic Engineering | Paper Link |
Interpreting the Haor Eco-System through Sustainable Design: Haor (Wetland) Eco-Interpretation Center, Moulvibazar, Sylhet, Bangladesh | Journal Article | Global Journal of Science Frontier Research: H, Environment & Earth Science, Volume 23, Issue 5 (Ver. 1.0), Pp 29-47 | 2023 | Dr. Ayasha Siddiqua | Department of Architecture | Paper Link |
3D Printed Conducting Polymers: Fundamentals, Advances, and Challenges | Book | 2023 | Dr. Begum Nadira Ferdousi | Department of Arts and Sciences | ||
Dataset for Road Roughness Assessment Using Image Classification Techniques and Deep Learning Models: A Case Study on Bangladeshi National Highways | Book | International Conference on Big Data, IoT and Machine Learning | 2023 | Prof. Dr. Kazi A Kalpoma | Department of Computer Science and Engineering | Paper Link |
Dataset for Road Roughness Assessment Using Image Classification Techniques and Deep Learning Models: A Case Study on Bangladeshi National Highways | Book | International Conference on Big Data, IoT and Machine Learning | 2023 | Prof. Dr. Kazi A Kalpoma | Department of Computer Science and Engineering | |
Efficient Lane Detection and Keeping for Autonomous Vehicles in Real-World Scenarios | Conference Proceedings | 2023 26th International Conference on Computer and Information Technology (ICCIT) | 2023 | Prof. Dr. Kazi A Kalpoma | Department of Computer Science and Engineering | Paper Link |
A Lane Detection Framework for Automated Vehicle Using Computer Vision | Others | International Conference on Power Engineering and Intelligent Systems (PEIS) | 2023 | Prof. Dr. Kazi A Kalpoma | Department of Computer Science and Engineering | Paper Link |
Deep learning image segmentation for satellite images of national highways of bangladesh | Conference Proceedings | IGARSS 2023-2023 IEEE International Geoscience and Remote Sensing Symposium | 2023 | Prof. Dr. Kazi A Kalpoma | Department of Computer Science and Engineering | Paper Link |
A Deep Learning Approach to Distinguish Normal Pneumonia and COVID-19 Pneumonia with Segmentation of Affected Areas of Chest X-Ray Images | Conference Proceedings | 5th International Conference on Communication and Computational Technologies (ICCCT 2023) | 2023 | Prof. Dr. Kazi A Kalpoma | Department of Computer Science and Engineering | Paper Link |
Road Quality Measurement System Using Satellite Images for National Highways of Bangladesh | Conference Proceedings | IGARSS 2023-2023 IEEE International Geoscience and Remote Sensing Symposium | 2023 | Prof. Dr. Kazi A Kalpoma | Department of Computer Science and Engineering | Paper Link |
An Automotive ECU-Based Forward Collision Prevention System | Conference Proceedings | International Conference on Advances in Data-driven Computing and Intelligent Systems | 2023 | Prof. Dr. Kazi A Kalpoma | Department of Computer Science and Engineering | Paper Link |
Characteristics assessment of TFT through 2D simulation under different material and structural configurations | Journal Article | Modern Physics Letter B | 2023 | Ms. Shourin Rahman Aura | Department of Electrical & Electronic Engineering | Paper Link |
Low Leakage CMOS Design Technique with Stable State Retention | Journal Article | IETE Journal of Research | 2023 | Ms. Shourin Rahman Aura | Department of Electrical & Electronic Engineering | Paper Link |
Revisiting the Shear Design Provisions for FRP-RC Deep Beams without Stirrups | Conference Proceedings | Proceedings of the 2nd International Conference on Advances in Civil Infrastructure and Construction Materials (CICM 2023), Volume 2. CICM 2023. Lecture Notes in Civil Engineering, vol 512. Springer, Cham. | 2023 | Mr. Khan Abid Ahsan | Department of Civil Engineering | Paper Link |
Lateral Cyclic Response of SMA-based Hybrid Steel Bridge Piers: A Parametric Study | Conference Proceedings | Second International Conference on Advances in Civil Infrastructure and Construction Materials (CICM 2023) | 2023 | Mr. Khan Abid Ahsan | Department of Civil Engineering | |
Availability of Seismic Data and Existing Attenuation Laws in Bangladesh: A Review | Conference Proceedings | Second International Conference on Advances in Civil Infrastructure and Construction Materials (CICM 2023) | 2023 | Mr. Khan Abid Ahsan | Department of Civil Engineering | Paper Link |
Present and Future Load Optimization of Electric Three Wheelers in Bangladesh | Conference Proceedings | 5th Sustainability and Resilience Conference: Energy And Industry 4.0 – Technologies And Applications | 2023 | Dr. Taskin Jamal | Department of Electrical & Electronic Engineering | |
Artificial Intelligence Approaches for Advanced Battery Management System in Electric Vehicle Applications: A Statistical Analysis towards Future Research Opportunities | Journal Article | Vehicles | 2023 | Dr. Taskin Jamal | Department of Electrical & Electronic Engineering | |
Empowering Remote Islands and Unlocking Sustainable Energy: A Hybrid Off-Grid DC System Approach | Conference Proceedings | 2023 10th IEEE International Conference on Power Systems (ICPS) | 2023 | Dr. Taskin Jamal | Department of Electrical & Electronic Engineering | |
Optimizing Residential Energy Consumption: Exploring Demand Side Management Strategies | Conference Proceedings | 2023 10th IEEE International Conference on Power Systems (ICPS) | 2023 | Dr. Taskin Jamal | Department of Electrical & Electronic Engineering | |
Fuelling the future: An in-depth review of recent trends, challenges and opportunities of hydrogen fuel cell for a sustainable hydrogen economy | Journal Article | Energy Reports | 2023 | Dr. Taskin Jamal | Department of Electrical & Electronic Engineering | |
Optimizing Energy Consumption in a University Campus through Demand Side Management Strategies | Conference Proceedings | 14th International Conference on Computing, Communication and Networking Technologies (ICCCNT), India | 2023 | Dr. Taskin Jamal | Department of Electrical & Electronic Engineering | |
Fuelling the future: An in-depth review of recent trends, challenges and opportunities of hydrogen fuel cell for a sustainable hydrogen economy | Journal Article | Energy Reports | 2023 | Dr. Taskin Jamal | Department of Electrical & Electronic Engineering | Paper Link |
Applications of energy storage systems in power grids with and without renewable energy integration — A comprehensive review | Journal Article | Journal of Energy Storage | 2023 | Dr. Taskin Jamal | Department of Electrical & Electronic Engineering | Paper Link |
Techno-Economic and Carbon Emission Assessment of a Large-Scale Floating Solar PV System for Sustainable Energy Generation in Support of Malaysia’s Renewable Energy Roadmap | Journal Article | Energies | 2023 | Dr. Taskin Jamal | Department of Electrical & Electronic Engineering | |
Additive Linear Modelling and Genetic Algorithm based Electric Vehicle Outlook and Policy Formulation for Decarbonizing the future Transport Sector of Bangladesh | Journal Article | Transport Policy | 2023 | Dr. Taskin Jamal | Department of Electrical & Electronic Engineering | |
Financial and non-financial disclosures on sustainable development: The mediating role of environmental accounting disclosure practices | Journal Article | International Journal of Financial, Accounting, and Management | 2023 | Mr. Md. Saheb Ali Mondal | School of Business | Paper Link |
Sustainable Banking Practices and Their Development: A Study on Banks Operating in Bangladesh | Journal Article | Journal of Business and Development Studies (JBDS) | 2023 | Mr. Md. Saheb Ali Mondal | School of Business | Paper Link |
Factors influencing the environmental accounting disclosure practices for sustainable development: A systematic literature review | Journal Article | International Journal of Financial, Accounting, and Management (IJFAM) | 2023 | Mr. Md. Saheb Ali Mondal | School of Business | Paper Link |
Coir fiber as thermal insulator and its performance as reinforcing material in biocomposite production | Journal Article | Heliyon | 2023 | Mr. Md. Arif Mahmud | Department of Textile Engineering | Paper Link |
Development of a biocomposite material using sugarcane bagasse and modified starch for packaging purposes | Journal Article | Journal of Materials Research and Technology | 2023 | Mr. Md. Arif Mahmud | Department of Textile Engineering | Paper Link |
Investigating Root Causes of Sewing Defects Using TQM Tools for Quality Improvement in the Knit Garment Industry | Journal Article | Textile & Leather Review | 2023 | Mr. Kazi Rezwan Hossain | Department of Textile Engineering | Paper Link |
Design and development of canvas trousers using sustainable natural dye | Journal Article | Tekstilna industrija | 2023 | Mr. Kazi Rezwan Hossain | Department of Textile Engineering | Paper Link |
IMPACT OF MODIFIED FEED MECHANISM ON SEAM QUALITY OF GARMENTS | Journal Article | ANNALS OF THE UNIVERSITY OF ORADEA FASCICLE OF TEXTILES, LEATHERWORK | 2023 | Mr. Kazi Rezwan Hossain | Department of Textile Engineering | Paper Link |
FABRICATION & MECHANICAL CHARACTERIZATION OF JUTE, COIR AND BANANA FIBER-REINFORCED HYBRID EPOXY COMPOSITE | Journal Article | Journal of Mechanical Engineering | 2023 | Mr. Shadman Sharar Alam | Department of Mechanical and Production Engineering | Paper Link |
Design of High-Speed Dual Port 8T SRAM Cell with Simultaneous and Parallel READ-WRITE Feature | Journal Article | International Journal of Electrical and Computer Engineering Systems (IJECES) | 2023 | Mr. S. M. Ishraqul Huq | Department of Electrical & Electronic Engineering | Paper Link |
Low Leakage CMOS Design Technique with Stable State Retention | Journal Article | IETE Journal of Research | 2023 | Mr. S. M. Ishraqul Huq | Department of Electrical & Electronic Engineering | Paper Link |
Investigation of Mechanical Properties of Nonwoven Recycled Cotton/PET Fiber‐Reinforced Polyester Hybrid Composites | Journal Article | Macromolecular Materials and Engineering | 2023 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Shear Behavior of Seawater Sea Sand Concrete Beams Reinforced with BFRP Bars and Stirrups | Journal Article | Journal of Composites for Construction | 2023 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Properties Prediction of Composites Based on Machine Learning Models: A Focus on Statistical Index Approaches | Journal Article | Materials Today Communications | 2023 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Advances in bioactive nanoparticles for wound healing, tissue engineering and drug delivery | Book | In book: Comprehensive Materials Processing, 2e | 2023 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Nanoparticles, nanocomposites, green/eco-composites, and hybrid composites and their applications in energy sectors | Book | In book: Comprehensive Materials Processing, 2e | 2023 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Engineered cementitious composites: Design, structural and 3D printing applications | Book | In book: Comprehensive Materials Processing, 2e | 2023 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Additive manufacturing techniques, their challenges, and additively manufactured composites for advanced engineering applications | Book | In book: Comprehensive Materials Processing, 2e | 2023 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Recent advances in applications of hybrid composites | Book | In book: Comprehensive Materials Processing, 2e | 2023 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Recent advances in sustainable building materials for the construction industry: Mechanical performance and applications | Book | In book: Comprehensive Materials Processing, 2e | 2023 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Biobased composites for advanced applications: Possibilities and difficulties on the path to circularity | Book | In book: Comprehensive Materials Processing, 2e | 2023 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Modeling approaches for bio-based composites | Book | In book: Comprehensive Materials Processing, 2e | 2023 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Advances in ceramic composites: Manufacture, performances, and applications | Book | In book: Comprehensive Materials Processing, 2e | 2023 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Biobased composites reinforced with annual plants—Design, manufacturing techniques, and parameters influencing the overall properties | Book | In book: Comprehensive Materials Processing, 2e | 2023 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
A review on eco-friendly basalt fibers, their composites and applications | Book | In book: Comprehensive Materials Processing, 2e | 2023 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Composite materials from synthetic and natural sources: Fabrication techniques and applications | Book | In book: Comprehensive Materials Processing, 2e | 2023 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Eco-friendly green approach of nickel oxide nanoparticles for biomedical applications | Journal Article | Journal of Open Chemistry | 2023 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Advances in biocomposite fabrication: Emerging technologies and their potential applications | Book | In Book: Reference Module in Materials Science and Materials Engineering | 2023 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Characterization and Comparative Evaluation of Structural, Chemical, Thermal, Mechanical, and Morphological Properties of Plant Fibers | Book | In Book: Annual Plant: Sources of Fibres, Nanocellulose and Cellulosic Derivatives | 2023 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
A critical review of developments in characterizations of polymer matrix composites with particulate reinforcements | Book | In book: Comprehensive Materials Processing, Materials Science and Materials Engineering | 2023 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Improving corrosion resistance of BFRP bars by coating CNTs modified resin in simulated pore solution of seawater sea sand concrete | Journal Article | Construction and Building Materials | 2023 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Effects of volume fractions and surface coating of textile yarns on the tensile performance of AR-glass textile reinforced concrete | Journal Article | Journal of Building Engineering | 2023 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Flexural behaviors of sandwich panels with AR-glass textile-reinforced concrete under the low-velocity impact | Journal Article | Journal of Building Engineering | 2023 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
A critical review of developments in the characterization of metal matrix composites with particulate reinforcements | Book | In Book: Materials Science and Materials Engineering | 2023 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Ceramic matrix composites with particulate reinforcements—Progress over the past 15 years | Book | In Book: Materials Science and Materials Engineering | 2023 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
A comparative study of bare and seawater sea sand concrete wrapped basalt fiber-reinforced polymer bars exposed to laboratory and real marine environments | Journal Article | Journal of Construction and Building Materials | 2023 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Recent advancements in polymer matrix nanocomposites for bone tissue engineering applications | Journal Article | Journal of Drug Delivery Science and Technology | 2023 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Sensor to Electronics Applications of Graphene Oxide through AZO Grafting | Journal Article | Journal of Nanomaterials | 2023 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Damping under Varying Frequencies, Mechanical Properties, and Failure Modes of Flax/Polypropylene Composites | Journal Article | Journal of Polymers | 2023 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Advanced biopolymers for automobile and aviation engineering applications | Journal Article | Journal of Polymer Research | 2023 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Durability of BFRP bars embedded in seawater sea sand coral aggregate concrete in simulated seawater environment: Effects of coral coarse aggregate and cement contents | Journal Article | Journal of Construction and Building Materials | 2023 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Plastic waste to plastic value: Role of industrial biotechnology | Book | In Book: Biodegradability of Conventional Plastics | 2023 | Dr. Md Zillur Rahman | Department of Mechanical and Production Engineering | Paper Link |
The Impact of Green HRM Practices on Environmental Performance in Bangladesh: The Mediating Role of Sustainability- Oriented Employee Behavior | Journal Article | PMIS Review | 2023 | Ms. Afrin Sultana | School of Business | Paper Link |
Transformer-Based Deep Learning Model for Stock Price Prediction: A Case Study on Bangladesh Stock Market. | Journal Article | International Journal of Computational Intelligence and Applications. | 2023 | Ms. Anika Bintee Aftab | Department of Computer Science and Engineering | Paper Link |
Phase change material-based rooftop on public transport for thermal management | Journal Article | Energy Storage and Saving | 2023 | Mr. Md. Araf Hossan | Department of Mechanical and Production Engineering | Paper Link |
A Methodology for Implementing Demand Side Management in a Community Having Both Residential and Commercial Customers | Conference Proceedings | 3rd International Conference on Robotics, Electrical and Signal Processing Techniques 2023 (3rd ICREST’23) | 2023 | Mr. S. J. Hamim | Department of Electrical & Electronic Engineering | |
A Study on a spatial model of Eco-tourism for economic capital growth in Sundarbans, Bangladesh | Conference Proceedings | 4th International Conference on Planning, Architecture and Civil Engineering, ICPACE 2023 | 2023 | Mr. Rifat Bin Ali | Department of Architecture | |
Effect of Input Channel Reduction on EEG Seizure Detection | Journal Article | PRZEGLĄD ELEKTROTECHNICZNY | 2023 | Ms. Taniza Marium | Department of Electrical & Electronic Engineering | |
Analysis of Organic Thin Film Transistor based ALU | Conference Proceedings | 2023 International Conference on Device Intelligence, Computing and Communication Technologies,(DICCT) | 2023 | Ms. Taniza Marium | Department of Electrical & Electronic Engineering | |
Characteristics assessment of TFT through 2D simulation under different material and structural configurations | Journal Article | Modern Physics Letters B | 2023 | Ms. Taniza Marium | Department of Electrical & Electronic Engineering | |
Performance Comparison of Pseudo-p and Complementary OTFT-based Combinational Circuits | Journal Article | Journal of VLSI Design and Signal Processing | 2023 | Ms. Taniza Marium | Department of Electrical & Electronic Engineering | |
Performance analysis of OTFT-based SRAM topologies | Journal Article | Memories - Materials, Devices, Circuits and Systems | 2023 | Ms. Taniza Marium | Department of Electrical & Electronic Engineering | Paper Link |
Investigating Root Causes of Sewing Defects Using TQM Tools for Quality Improvement in the Knit Garment Industry. | Journal Article | Textile & Leather Review | 2023 | Dr. Chowdhury Jony Moin | Department of Textile Engineering | Paper Link |
Evaluation and optimization of pretreatment process for lyocell knitted fabric dyeing with reactive dyestuff | Journal Article | Cellulose | 2023 | Ms. Nasrin Akter | Department of Textile Engineering | Paper Link |
The influence of mixed thickeners on printing over lyocell knitted fabric | Journal Article | Heliyon | 2023 | Ms. Nasrin Akter | Department of Textile Engineering | Paper Link |
Numerical Investigation of the Enhancement of the Aerodynamic Performance for Newly Modified Blended Airfoils Utilizing S809, S829, and NACA 2412 Baseline Shapes | Journal Article | Arabian Journal for Science and Engineering | 2023 | Dr. Mohammad Rejaul Haque | Department of Mechanical and Production Engineering | |
Effect of fibre orientation and stacking sequence on properties of hybrid composites | Journal Article | Materials Science and Technology | 2023 | Dr. Mohammad Rejaul Haque | Department of Mechanical and Production Engineering | |
Numerical Investigation of MHD Mixed Convection Phenomenon in a Lid-Driven Hexagonal Enclosure with Wavy Wall and SWCNT-MWCNT Nanofluids | Journal Article | Arabian Journal for Science and Engineering | 2023 | Dr. Mohammad Rejaul Haque | Department of Mechanical and Production Engineering | |
Mechanical characterization of banana-nylon fibre reinforced Vinyl ester composites | Journal Article | Advances in Materials and Processing Technologies | 2023 | Dr. Mohammad Rejaul Haque | Department of Mechanical and Production Engineering | |
Numerical investigation of the hydrothermal performance of novel pin-fin heat sinks with hyperbolic, wavy, and crinkle geometries and various perforations | Journal Article | International Journal of Thermal Sciences | 2023 | Dr. Mohammad Rejaul Haque | Department of Mechanical and Production Engineering | |
Numerical investigation of the thermal performance optimization inside a heat exchanger tube using different novel combination of perforations on Y-shaped insert | Journal Article | International Journal of Thermal Sciences | 2023 | Dr. Mohammad Rejaul Haque | Department of Mechanical and Production Engineering | |
Does Code Smell Frequency Have a Relationship with Fault-proneness? | Conference Proceedings | International Conference on Evaluation and Assessment in Software Engineering (EASE) | 2023 | Mr. Md. Masudur Rahman | Department of Computer Science and Engineering | Paper Link |
Evaluation of Mechanical Properties of Kenaf-Woven Kevlar & Jute-Woven Kevlar Reinforced Hybrid Composites with Different Weight Fractions and Ply Sequences | Conference Proceedings | 7th International Conference on Mechanical Engineering and Renewable Energy (ICMERE-2023) | 2023 | Dr. Abu Hamja | Department of Mechanical and Production Engineering | |
Fabrication and Analysis of Biomass Pellets from Rice Husk and Wood | Conference Proceedings | 7th International Conference on Mechanical Engineering and Renewable Energy (ICMERE-2023) | 2023 | Dr. Abu Hamja | Department of Mechanical and Production Engineering | |
Reduction of changeover time through SMED with RACI integration in garment factories | Journal Article | International Journal of Lean Six Sigma | 2023 | Dr. Abu Hamja | Department of Mechanical and Production Engineering | Paper Link |
Recycling of Plastic Polymer: Reinforcement of Building Material Using Polymer Plastics of Used COVID-19 Syringes | Journal Article | Buildings | 2023 | Dr. Abu Hamja | Department of Mechanical and Production Engineering | Paper Link |
Depression Detection Through Smartphone Sensing: A Federated Learning Approach | Journal Article | International Journal of Interactive Mobile Technologies | 2023 | Ms. Nawrin Tabassum | Department of Computer Science and Engineering | Paper Link |
Analyzing the key barriers of adopting Industry 4.0 in Bangladesh’s ready-made garment industry: an emerging economy example | Journal Article | International Journal of Industrial Engineering and Operations Management | 2023 | Ms. Sadia Hasanat | Department of Mechanical and Production Engineering | |
Simulation of biological fluid flow evolution and particle transport through the human respiratory bronchioles and alveoli system. | Conference Proceedings | A F Mujibur Rahman- Bangladesh Mathematical Society National Mathematics Conference 2022 | 2023 | Ms. Nusrat Tamanna Mim | Department of Arts and Sciences | |
A Bengali News and Public Opinion Dataset from YouTube | Journal Article | Data in Brief | 2023 | Ms. Lomat Haider Chowdhury | Department of Computer Science and Engineering | Paper Link |
Fostering Employee Commitment: The Role of Psychological Contract | Journal Article | Asian Journal of Management | 2023 | Ms. Sabreya Khanom Zuma | School of Business | |
Internet and Women: Does the Internet Influence Women’s Empowerment? | Journal Article | Journal of International Business and Management (JIBM) | 2023 | Ms. Sabreya Khanom Zuma | School of Business | Paper Link |
Fabrication and analysis of Biomass pallets from rice husk and wood | Conference Proceedings | International Conference on Mechanical Engineering and Renewable Energy 2023 | 2023 | Mr. Yeadul Islam Sazal | Department of Mechanical and Production Engineering | |
Recent advances in applications of hybrid composites | Book | Materials Science and Materials Engineering | 2023 | Mr. Yeadul Islam Sazal | Department of Mechanical and Production Engineering | Paper Link |
Modeling approaches for bio-based composites | Book | Materials Science and Materials Engineering | 2023 | Mr. Yeadul Islam Sazal | Department of Mechanical and Production Engineering | Paper Link |
Chemically–treated Jute Bags as an Alternative to Poly(propylene) Bags | Conference Proceedings | The Fiber Society 2023 Fall Meeting and Technical Conference, Drexel University Philadelphia, Pennsylvania, USA | 2023 | Dr. Mohammad Tajul Islam | Department of Textile Engineering | Paper Link |
Dyeing of cotton/acrylic blend fabric in a single-bath-single-stage method using indigo dye | Journal Article | Coloration Technology | 2023 | Dr. Mohammad Tajul Islam | Department of Textile Engineering | Paper Link |
Nonwoven natural fiber preforms | Book | Multiscale Textile Preforms and Structures for Natural Fiber Composites | 2023 | Dr. Mohammad Tajul Islam | Department of Textile Engineering | Paper Link |
Structural Coloration in Textiles | Book | Advanced Technology in Textiles | 2023 | Dr. Mohammad Tajul Islam | Department of Textile Engineering | Paper Link |
Dragon Fruit (Hylocereus polyrhizus): A Green Colorant for Cotton Fabric | Journal Article | Colorants | 2023 | Dr. Mohammad Tajul Islam | Department of Textile Engineering | Paper Link |
Bibliometric Evidence on the Trend and Future Direction of the Research on Textile Coloration with Natural Sources | Journal Article | Coatings | 2023 | Dr. Mohammad Tajul Islam | Department of Textile Engineering | Paper Link |
Design and development of canvas trousers using sustainable natural dye | Journal Article | Tekstilna industrija | 2023 | Mr. Mohammad Ashraful Alam | Department of Textile Engineering | |
Impact of modified feed mechanism on the seam quality of garments | Journal Article | Annals of the University of Oradea. Fascicle of Textiles, Leatherwork | 2023 | Mr. Mohammad Ashraful Alam | Department of Textile Engineering | Paper Link |
Design, fabrication, and characterization of 3D-printed ABS and PLA scaffolds potentially for tissue engineering | Journal Article | Results in Engineering | 2023 | Mr. Sazedur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Biobased composites for advanced applications: Possibilities and difficulties on the path to circularity | Book | Reference Module in Materials Science and Materials Engineering | 2023 | Mr. Sazedur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Recent advances in applications of hybrid composites | Book | Reference Module in Materials Science and Materials Engineering | 2023 | Mr. Sazedur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Recent developments in functional plant fiber-based composites and their engineering applications | Book | Reference Module in Materials Science and Materials Engineering | 2023 | Mr. Sazedur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Modeling approaches for bio-based composites | Book | Reference Module in Materials Science and Materials Engineering | 2023 | Mr. Sazedur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Biobased composites reinforced with annual plants—Design, manufacturing techniques, and parameters influencing the overall properties | Book | Reference Module in Materials Science and Materials Engineering | 2023 | Mr. Sazedur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Overview of Bioceramics | Book | Advanced Bioceramics | 2023 | Mr. Sazedur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Fabrication and analysis of biomass pellets from rice husk and wood | Conference Proceedings | The 7th International Conference on Mechanical Engineering and Renewable Energy (ICMERE 2023) | 2023 | Mr. Sazedur Rahman | Department of Mechanical and Production Engineering | |
A novel approach to optimize material distributions of rotating functionally graded circular disk under minimum and prescribed stresses | Journal Article | Materials Today Communications | 2023 | Mr. Sazedur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Annual Plant Reinforced Biocomposite Fiberboards—Investigation on Mechanical Properties | Book | Annual Plant: Sources of Fibres, Nanocellulose and Cellulosic Derivatives: Processing, Properties and Applications | 2023 | Mr. Sazedur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Processing of Bioceramics by Extrusion and Slip Casting | Book | Advanced Bioceramics | 2023 | Mr. Sazedur Rahman | Department of Mechanical and Production Engineering | Paper Link |
Lateral strength evaluation of ferrocement strengthened masonry infilled RC frame based on experimentally observed failure mechanisms | Journal Article | Structures | 2023 | Dr. Debasish Sen | Department of Civil Engineering | Paper Link |
Invesitigation on properties of ready mixed concrete over transit time | Journal Article | Malaysian Journal of Civil Engineering | 2023 | Dr. Debasish Sen | Department of Civil Engineering | Paper Link |
Numerical investigation on the effect of infill masonry on lateral behaviour of surrounding RC frame | Journal Article | Asian Journal of Civil Engineering | 2023 | Dr. Debasish Sen | Department of Civil Engineering | Paper Link |
Comparison of lateral behavior of an existing RC building under nonlinear static and incremental dynamic loads | Journal Article | Asian Journal of Civil Engineering | 2023 | Dr. Debasish Sen | Department of Civil Engineering | Paper Link |
Numerical modelling and validation of lateral behavior of masonry-infilled RC frame focusing sliding failure of infill panel | Journal Article | Asian Journal of Civil Engineering | 2023 | Dr. Debasish Sen | Department of Civil Engineering | Paper Link |
Prospects and Challenges of Implementing FRC Proposed Accrual Basis Accounting in Public Enterprises of Bangladesh | Conference Proceedings | Emerging Issues in Accounting and Financial Management: The Role of Academics and Professionals | 2023 | Mr. Sharoar Khan | Department of Arts and Sciences | |
Turning SKD 11 Hardened Steel: An Experimental Study of Surface Roughness and Material Removal Rate Using Taguchi Method | Journal Article | Advances in Materials Science and Engineering | 2023 | Prof. Dr. Imtiaz Ahmed Choudhury | Department of Mechanical and Production Engineering | Paper Link |
Developments in Coatings technologies for optical fibre sensors | Book | Comprehensive Materials Processing, 2nd Edition. | 2023 | Prof. Dr. Imtiaz Ahmed Choudhury | Department of Mechanical and Production Engineering | Paper Link |
Review of Developments in Sensor Technology For Monitoring of Health-Related Conditions | Book | Reference Module in Materials Science and Materials Engineering 2023 | 2023 | Prof. Dr. Imtiaz Ahmed Choudhury | Department of Mechanical and Production Engineering | Paper Link |
Review of Recent Developments in processing and application of Aluminium Matrix Composites with Alumina particles | Book | Reference Module in Materials Science and Materials Engineering 2023 | 2023 | Prof. Dr. Imtiaz Ahmed Choudhury | Department of Mechanical and Production Engineering | Paper Link |
Review of the Developments in Composite Materials Over the Last 15 Years | Book | Reference Module in Materials Science and Materials Engineering 2023 | 2023 | Prof. Dr. Imtiaz Ahmed Choudhury | Department of Mechanical and Production Engineering | Paper Link |
Review of The Current Issues of Connectivity, Durability and Reliability of Sensors and Their Solutions | Book | Reference Module in Materials Science and Materials Engineering 2023 | 2023 | Prof. Dr. Imtiaz Ahmed Choudhury | Department of Mechanical and Production Engineering | Paper Link |
Review of New Developments in Different Types of Sensors Over the Past 15 Years | Others | Reference Module in Materials Science and Materials Engineering 2023 | 2023 | Prof. Dr. Imtiaz Ahmed Choudhury | Department of Mechanical and Production Engineering | Paper Link |
Critical success factors for circular economy in the waste electrical and electronic equipment (WEEE) sector in an emerging economy: Implications for stakeholders | Journal Article | Journal of Cleaner Production | 2023 | Ms. Prattusha Bhattacharjee | Department of Mechanical and Production Engineering | Paper Link |
The Impact of Major Housing Factors on the Dwelling Units of Industrial Workers in Bangladesh | Journal Article | Trends in Technical & Scientific Research | 2023 | Ms. Zareen Jahan Khan | Department of Architecture | |
Collagen/Nigella sativa/chitosan inscribed electrospun hybrid bio-nanocomposites for skin tissue engineering | Journal Article | Journal of Biomaterials Science, Polymer Edition | 2023 | Ms. Fahmida-E-Karim | Department of Textile Engineering | Paper Link |
Extraction and characterization of a newly developed cellulose enriched sustainable natural fiber from the epidermis of Mikania micrantha | Journal Article | Heliyon | 2023 | Ms. Fahmida-E-Karim | Department of Textile Engineering | Paper Link |
Mechanical Characterization of Luffa-Bagasse Fiber Reinforced Polymer Based Hybrid Composite | Journal Article | Textile & Leather Review | 2023 | Ms. Fahmida-E-Karim | Department of Textile Engineering | Paper Link |
Design and fabrication of an instrument for splitted jute fiber length measurement | Journal Article | Journal of The Institution of Engineers (India): Series E. | 2023 | Ms. Fahmida-E-Karim | Department of Textile Engineering | Paper Link |
Explainable Multimodal Sentiment Analysis on Bengali Memes | Conference Proceedings | 26th International Conference on Computer and Information Technology (ICCIT) | 2023 | Ms. Tasnuva Binte Rahman | Department of Computer Science and Engineering | |
Microstructure and mechanical performance of low-cost biomedical-grade Titanium-316L alloy | Journal Article | Journal of Materials Research and Technology | 2023 | Mr. Chowdhury Ahmed Shahed | Department of Mechanical and Production Engineering | |
Interface and mechanical properties of graphene/copper composite with sonication induced Au decoration of graphene | Journal Article | Powder Technology | 2023 | Mr. Chowdhury Ahmed Shahed | Department of Mechanical and Production Engineering | |
STUDY AND ANALYSIS OF METAL PARTS FABRICATED THROUGH FUSED DEPOSITION MODELLING, DE-BINDING AND SINTERING PROCESSES | Journal Article | Journal of Engineering Science and Technology | 2023 | Mr. Chowdhury Ahmed Shahed | Department of Mechanical and Production Engineering | |
Influence of Drilling Parameters on the Delamination and Surface Roughness of Insulative-Coated Glass/Carbon-Hybrid Composite | Journal Article | Advances in Polymer Technology | 2023 | Mr. Chowdhury Ahmed Shahed | Department of Mechanical and Production Engineering | |
Review of the developments in composite materials over the last 15 years | Others | 2023 | Mr. Chowdhury Ahmed Shahed | Department of Mechanical and Production Engineering | Paper Link | |
Antibacterial mechanism with consequent cytotoxicity of different reinforcements in biodegradable magnesium and zinc alloys: A review | Journal Article | Journal of Magnesium and Alloys | 2023 | Mr. Chowdhury Ahmed Shahed | Department of Mechanical and Production Engineering | Paper Link |
A promising palm leaves waste-derived biochar for efficient removal of tetracycline from wastewater | Journal Article | Journal of Molecular Structure | 2023 | Dr. Md. Aminul Islam | Department of Arts and Sciences | Paper Link |
Carbon-based materials as promising sorbents for analytical sample preparation: Recent advances and trends in extraction of toxic metal pollutants from various media | Journal Article | Trends in Analytical Chemistry (Q1, IF 13.1) | 2023 | Dr. Md. Aminul Islam | Department of Arts and Sciences | Paper Link |
An eco-friendly chitosan-diethylaminoethyl cellulose composite: In-depth analysis of lead (II) and arsenic(V) decontamination from water with molecular perspectives | Journal Article | Journal of Molecular Liquids (Q1, IF 6, Scopus) | 2023 | Dr. Md. Aminul Islam | Department of Arts and Sciences | Paper Link |
Mechanical Properties of PVC Fiber-Reinforced Concrete—Effects of Fiber Content and Length | Journal Article | Buildings | 2023 | Mr. Tarikul Islam | Department of Civil Engineering | Paper Link |
Numerical modelling and validation of lateral behavior of masonry-infilled RC frame focusing sliding failure of infill panel | Journal Article | Asian Journal of Civil Engineering | 2023 | Mr. Tarikul Islam | Department of Civil Engineering | Paper Link |
Mediation of Technology Adaptation Capabilities between the Relationship of Service Quality and Satisfaction: An Investigation on Young Customers towards E-Commerce in China | Journal Article | IEEE Access | 2023 | Prof. Dr. Wahiduzzaman Khan | School of Business | |
Circular value creation: business models and supply chain strategies | Journal Article | Environmental Science and Pollution Research | 2023 | Prof. Dr. Wahiduzzaman Khan | School of Business | |
Assessing the impact of blockchain technology on the overall performance of sustainable supply chains: an analytical perspective | Journal Article | Environmental Science and Pollution Research | 2023 | Prof. Dr. Wahiduzzaman Khan | School of Business | |
Bengali Fake Review Detection using Semi-supervised Generative Adversarial Networks | Conference Proceedings | 5th International Conference on Natural Language Processing (ICNLP) | 2023 | Prof. Dr. Md. Shahriar Mahbub | Department of Computer Science and Engineering | Paper Link |
Multi-objective optimization of an energy community: an integrated and dynamic approach for full decarbonisation in the European Alps | Journal Article | International Journal of Sustainable Energy Planning and Management | 2023 | Prof. Dr. Md. Shahriar Mahbub | Department of Computer Science and Engineering | Paper Link |
Assessing the Impact of Spacer Size Variations on the Ring-spun Yarn Quality Ranking | Journal Article | Textile & Leather Review | 2023 | Mr. Jamal Hossen | Department of Textile Engineering | Paper Link |
Influence of Blending Method and Blending Ratio on Ring-spun Yarn Quality – a MANOVA Approach | Journal Article | Tekstilec | 2023 | Mr. Jamal Hossen | Department of Textile Engineering | Paper Link |
Interpretable Movie Review Analysis Using Machine Learning and Transformer Models Leveraging XAI | Conference Proceedings | The Asia-Pacific Conference on Computer Science and Data Engineering 2022 | 2023 | Mr. Sajib Kumar Saha Joy | Department of Computer Science and Engineering | |
An Empirical Study on Bengali News Headline Categorization Leveraging Different Machine Learning Techniques | Conference Proceedings | International Conference on Computer and Information Technology (ICCIT) 2022 | 2023 | Mr. Sajib Kumar Saha Joy | Department of Computer Science and Engineering | |
An Empirical Studies on How the Developers Discussed about Pandas Topics | Conference Proceedings | International Conference on Machine Intelligence and Emerging Technologies (MIET 2022) | 2023 | Mr. Sajib Kumar Saha Joy | Department of Computer Science and Engineering | |
Different Methods of EEG Signal Analysis Using Power Spectral Density, ChronoNet and ResNest | Journal Article | European Journal of Electrical Engineering and Computer Science (EJECE) | 2023 | Mr. Ashek Seum | Department of Computer Science and Engineering | Paper Link |
QRAM: Quantum Technology for Random Access Memory | Conference Proceedings | 2023 26th International Conference on Computer and Information Technology (ICCIT) | 2023 | Ms. Tamanna Tabassum | Department of Computer Science and Engineering | Paper Link |
Field Programmable Gate Array in DNA Computing | Conference Proceedings | International Conference on Big Data, IoT and Machine Learning | 2023 | Ms. Tamanna Tabassum | Department of Computer Science and Engineering | Paper Link |
Design and Analysis of Memory Devices in Quantum and DNA Computing | Others | IEEE Computer Society Bangladesh Chapter Summer Symposium | 2023 | Ms. Tamanna Tabassum | Department of Computer Science and Engineering | |
Programmable Logic Array in Quantum Computing | Book | International Conference on Machine Intelligence and Emerging Technologies (MIET) | 2023 | Ms. Tamanna Tabassum | Department of Computer Science and Engineering | Paper Link |
QPROM: Quantum Nanotechnology for Data Storage Using Programmable Read Only Memory | Book | International Conference on Machine Intelligence and Emerging Technologies (MIET) | 2023 | Ms. Tamanna Tabassum | Department of Computer Science and Engineering | Paper Link |
Analyzing the key barriers of adopting Industry 4.0 in Bangladesh’s ready-made garment industry: an emerging economy example | Journal Article | International Journal of Industrial Engineering and Operations Management | 2023 | Mr. Rafat Rahman | Department of Mechanical and Production Engineering | Paper Link |
Municipal solid waste management: Identification and analysis of technology selection criteria using Fuzzy Delphi and Fuzzy DEMATEL technique | Journal Article | Heliyon | 2023 | Mr. Sheak Salman | Department of Mechanical and Production Engineering |